200W UV Sterilization Trolley UV Disinfection Lamp

UV trolley

1: Product name:UV trolley

2: Power:200w

3: Voltage:220/110V-50/60HZ

4: Lamp body material:Cold rolled steel sheet

5: Tube material:Quartz material

6: Application area:＜200m²

7: Tube lifespan:＞６000h

8: Fuselage lifespan:＞２years

9: UV wavelength:253.7(Without ozone)

    253.7+185(With ozone)

Usage method
1. open the door, take out the light tube and slowly lift it to the required height
2. turn on the timer clockwise to set the disinfection time
3. plug in the power supply and turn on the switch with the light, ork with the sterilization light, and leave the site
4. after disinfection, the timer will automatically turn off the lamp power
5. after use,turn off the start switch, unplug the power plug, hold the lamp arm by hand, press the regulating button of the lamp,put down the lamp and close the protective door

Matters needing attention
1. timer must be used clockwise
2. if there is dust on the surface of the lamp after using for a period of time, please wipe the lamp with alcohol cotton or gauze to avoid affecting the effect
3. during the operation of disinfection lamp, personnel must leave the site,and it is strictly prohibited to use it under the condition of someone, so as to avoid burning eyes and skin
4. unplug the power plug when repairing this product
5. when not in use, it should be placed in a dry and well ventilated room