HIKE Technology Co., Ltd. |
|
30W Led SMD 3030 Street Light Module Safety Led Modular Street Light 30 in 1
Application:
(1) The design of Street Light Module joins LED and IP65 water/dust
proof. It takes advantage of
energy saving and different angles, and adapts to different requirement of street lighting, like 60w,
120w by changing number of Led modules.
(2) This street Light Module can be used by replacing light source and bracket , Applicable for street
light and solar street light, Tunnel Light, Gas station Light and so on.
Product Description:
Lens' Model Number | HK-3014580P-23670 |
Lens' Size | L236*W70mm |
PCB Board's Size | 218*52*1.6mm |
Beam Angel | 145x80 Degree |
Main Parts | Lens+ Silicone gasket + AL PCB mounting leds |
Material | PC |
Temperature | -35℃-120℃ |
Transmittance | 92% |
LED series | 3030 |
Configuration of Led Light Module Lens:
3030 Module Lens | |||||
Power | Heat Sink's Size | Lens' Size and Specs | PCB Board's Size | Cable/M18/M15 | Gland |
30W | 300*70*23mm | 236*70mm-30 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
40W | 300*70*29mm | 236*70mm-40 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
50W | 300*70*40mm | 236*70mm-50 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
60W | 300*70*42mm | 236*70mm-64 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
60W | 152*120*40mm | 125*120mm-64 in 1 lens | 96*91*1.6mm | 2*0.75*200MM | M12 |
5050 Module Lens | |||||
Power | Heat Sink's Size | Lens' Size and Specs | PCB Board's Size | Cable/M18/M15 | Gland |
30W | 300*70*23mm | 236*70mm-18 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
40W | 300*70*29mm | 236*70mm-18 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
50W | 300*70*40mm | 236*70mm-28 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
60W | 300*70*42mm | 236*70mm-28 in 1 lens | 218*52*1.6mm | 2*0.75*200MM | M12 |
60W | 152*120*40mm | 125*120mm-28 in 1 lens | 96*91*1.6mm | 2*0.75*200MM | M12 |
Drawing:
Light Distribution:
FAQ
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 2-3 days, mass production time needs 5-10 days.
Q3. How to proceed an order for led light?
A: Firstly, let us know your requirements or application.
Secondly, we quote according to your requirements or our
suggestions.
Thirdly, customer confirms the samples and places deposit for
formal order.
Fourthly, we arrange the production.
Q4. Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Application: