Wall Mounted Sensor Temperature Control Infrared Sensor Fast Digital Heat Control Quick Detector

Quick points:

1. Non-contact, no need to hold, to avoid cross-infection.

2. With the new chip, the sensing time is faster (0.1 s) and the passing rate is greatly improved (50 people per minute) .

3. High Precision, accuracy tolerance: 0.234 ~ 45 °C

4. With detection failure lighting tips, abnormal temperature lighting tips early warning.

5. CAN CONNECT USB power supply, charger, self-installed lithium battery.

6. Hd Display, 5m visual range.

7.Kill. Intelligent infrared forehead thermometer, no need to hold, can be suspended

double-sided adhesive tape / fixed bracket and so on.

8. The price makes up the price vacuum of the hand-held forehead temperature gun and the high cost of the thermal imaging temperature door.

9. It can be used in different situations. Office / MTR / Family / Supermarket / Shop / Community / entrance, etc. .

Specification:

Product Model: MK 3

1. Temperature measurement accuracy: accuracy 0.2 °C (34 ~ 45 °C, need to put the working environment 30 minutes later to use)

2. ALARM MODE: abnormal automatic alarm, flash + SOUND TICK

3. Measurement Distance: 5 cm ~ 10 cm automatic measurement

4. Display screen: Digital Display

5. USB: USB ANDROID STANDARD INTERFACE

6. ADAPTION POWER: built-in, lithium battery, Pre-2600mah, 48 hours working time (external power and internal power to switch at will)

7. INSTALLATION: Hanging, double-sided adhesive tape, bracket fixed

8. Working temperature: 10 °C ~ 40 °C (recommended 15 °C ~ 35 °C)

9. Measuring Range: 0 ~ 50 °C

10. Response Time: 0.5 S

11. Standby Mode: non-working Time 5 s standby, red point dynamic cycle

12. Input Voltage: DC 5V 1500MA

Attentions:
1. It is the responsibility of the user to ensure the electromagnetic compatibility environment of the equipment so that the equipment can work properly.

2. It is recommended that the electromagnetic environment be evaluated before equipment is used.

3. To change the use of the environment, you need to leave the equipment for more than 30 minutes.

4. Please measure your forehead against the thermometer.

5. Do not use outdoors or in bright light.

6. Use the equipment should be away from the air-conditioning mouth, Fan and other equipment.

7. Please use a qualified, safety-certified battery. Using an unqualified or non-rechargeable battery may cause fire or explosion.

8. If the battery is not working after installation, please insert the charging wire to activate it and then it can be used normally.