|
[China]
Trade Verify
Address: No.28, Moyu Road, Jiading District, Shanghai,China
Contact name:Julia
Shanghai HD M&E Tech Co., Ltd. |
|
Verified Suppliers
|
|
|
Super cost-effective low failure rate HTC40E Horizontal Slant Bed
CNC Lathe
Machine Tool Srtucture
Integral spindle unit, reduce the power loss of mechanical
transmission, fast and steady start, with low temperature rise,
small thermal deformation, high precision features.
Adopts the integral bed with an oblique Angle of 30°, and the force
is more stable when cutting. The bed material is made of high
density cast iron with high strength and good shock absorption.
Closed chip discharge chamber, to ensure that the cutting fluid
will not flow, easy to collect iron chips.
Tail seat, with bed integral sliding guide rail, telescopic sleeve,
manual locking, good rigidity.
Single layer pull cover, independent single layer pull cover is
arranged inside the machine tool to reduce levels, reduce faults,
not only waterproof and iron filings, but also can move at high
speed and low noise.
Main Technical parameters
| Items | Unit | HTC40E/300 | HTC40E/500 | ||
| Maximum swing diameter over bed | mm | 500 | 500 | ||
| Maximun cutting length | mm | 300 | 500 | ||
| Maximum cutting diameter | mm | 360 | 360 | ||
| Maximum swing diameter on the slide | mm | 320 | 320 | ||
| Spindle nose | A2-6 | A2-6 | |||
| Spindle hole diameter | mm | 65 | 65 | ||
| Diameter of maximum through bar | mm | 50 | 50 | ||
| Single spindle | Spindle speed range | r/min/Nm | 50~4500/177 | 50~4500/177 | |
| Headstock | Spindle maximum output torque | ||||
| Main motor | 30 minutes / continuous | kW | 15/11 | 15/11 | |
| Standard chuck | Chuck diameter | inch | 8'' | 8'' | |
| X-axis fast moving speed | m/min | 30 | 30 | ||
| Z-axis fast moving speed | m/min | 30 | 30 | ||
| X-axis travel | mm | 200 | 200 | ||
| Z-axis travel | mm | 320 | 550 | ||
| Tailstock stroke | mm | _ | 350 | ||
| Tailstock spindle taper taper | Morse | _ | 5# | ||
| Top stroke | mm | _ | 100 | ||
| Standard tool holder form | Horizontal 8 station | Horizontal 8 station | |||
| Tool size | External knife | mm | 25×25 | 25×25 | |
| Boring bar diameter | mm | 40 | 40 | ||
| Machining Accuracy | IT6 | IT6 | |||
| Surface roughness of machined workpiece | μm | Ra1.6 | Ra1.6 | ||
| Positioning accuracy | X axis | mm | 0.008 | 0.008 | |
| Z axis | mm | 0.008 | 0.008 | ||
| Repeat position accuracy | X axis | mm | 0.004 | 0.004 | |
| Z axis | mm | 0.004 | 0.004 | ||
| Weight capacity | Disk type | kg | 200 | 200 | |
| Shaft parts | kg | _ | 500 | ||
| Machine weight | kg | 3400 | 3650 | ||
| Machine tool appearance | Length × width × height | mm | 2400×1900×1850 | 2400×1900×1850 | |
Standard Configuration
CNC system GSK988TA
Taiwan 8” solid chuck
8-position servo-turret
Hydraulic tailstock
Imported bearing
Domestic Lead screw and guide-way
Automatic Lubrication System
Automatic Coolant System
Lighting lamp
Full enclosure splash guard
Telescopic covers
Optional configuration
Fanuc control system
Taiwan 8” hollow chuck
12-position servo-turret
Imported lead screw and guide-way
Auto chip conveyer & chip chart
Automatic bar feeder
Power tool turret
Machine Advantage
I .Narrow V belt drive structure
Through the belt pulley directly drive the spindle rotation, reduce
the power loss of mechanical transmission, start fast and stable.
II .Servo tool rest
Driven by servo motor, high precision and high reliability, can
meet the requirements of high performance and fast tool change.
III .The integrated spindle encoder
The special spindle encoder cancels the synchronous belt
transmission mechanism, effectively reduces the failure rate.
IV .Two axis feed
X axis and Z axis are driven by servo motor and connected directly
with ball screw through elastic coupling.
Two-axis guide rail adopts rolling guide rail, the guide rail is
four direction equal load type, high precision load greatly
improves the processing accuracy and production efficiency
Application Field
