Active Member
|
[China]
Address: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103
Contact name:
Shenzhen SMTfly Electronic Equipment Manufactory Ltd |
|
|
2mm PCB Stencil Cleaning Machine- Fixture Cleaning Machine,SMTfly-5200 Advantages:
2mm PCB Stencil Cleaning Machine- Fixture Cleaning Machine,SMTfly-5200 Specification:
| Cleaning basket size | 1000*200(H)mm Special size need to be customized |
| Cleaning fluid capacity | 80L(Max) |
| Rinse fluid capacity | 80L(Max) |
| Cleaning method | Spray rotary cleaning and rinsing |
| Dry way | Heated air knife dry |
| Recommended cleaning time | 5-20 mins |
| Recommended rinse time | 2-3 mins |
| Recommended drying time | 5-20 mins |
| Cleaning filter | Using 3-level filtration |
| Class 1 filter | 2mm(Filter impurities) |
| Class 2,3 filters | 100um/20um(Filter flux, rosin and so on) |
| Blower | 3.7KW Heated to 80° |
| Diaphragm pump | 1 inch diaphragm pump (pumping, drainage) |
| Air supply | 0.5Mpa~ 0.7Mpa,600-800L/min |
| Power supply | AC380V,3Phase,22KW |
| Weight | about 500KG |
| Dimension | 1380(L) ×2100mm(W) ×1400mm(H) |
SMTfly-5200 Machine and Artificial / Ultrasonic Cleaning Fixture Comparison:
| Spray cleaning | Manual or ultrasonic cleaning | Comparing results |
| Spray pressure can be adjusted, batch cleaning, fast and efficient | Cleaning time is long, low efficiency | ≥ |
| One-touch operation, no need to special cleaning personnel | Iron brush fixture, dirty, tired, need special cleaning personnel | ≥ |
| Up and down, around the full range of cleaning, cleaning thoroughly, high cleanliness | Fixture on the dead, the surface dirty, cleaning difficult | ≥ |
| The solution is recycled several times to save the solvent | Need to immersion cleaning, cleaning costs are high, | ≥ |
| Spray cleaning and rinsing, governance well intact | Iron brush cleaning will be raised, the surface off the phenomenon, the impact of follow-up product quality | ≥ |
| Cleaning + rinse + dry, after cleaning the surface without solvent | No rinse, after cleaning solvent residue, after the use of heat after the smell of smell out | ≥ |
Parts of the PCB Stencil Cleaning Machine- Fixture Cleaning Machine,SMTfly-5200:
1. Aning Basket
Place the cleaning fixture to be cleaned, rinse, rinse, dry rotation automatically, 1m diameter cleaning basket, can be placed more than one piece of fixture, to achieve batch cleaning
2. Pump Cleaning pump/rinse pump/blower
High-quality, high-flow electric pump and pneumatic pump,theoutput pressure, high flow god cleaning effect
High-power, high-flow blower, to ensure that drying effect, improve drying speed.
3. Liquid tend cleaning tank/rinse tank
Respectively, to store cleaning solvents and rinse liquids to form separate piping systems
4. Control System
Completely independent distribution cabinet to protect electrical parts from cleaning and steam damage to ensure equipment life
2mm PCB Stencil Cleaning Machine- Fixture Cleaning Machine,SMTfly-5200 Application:
Blast furnace governance cleaning:
Back welding furnace governance, tray, fixture,Synthetic stone, aluminum, stainless steel and so on.
Reflow soldering / wave soldering maintenance:
Reflow soldering, filter, wave soldering chain, jaws,Any machine maintenance parts.
Parts:Electronics, hardware, lance glue surface of the oil,Washable parts
