Active Member
|
[China]
Address: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103
Contact name:
Shenzhen SMTfly Electronic Equipment Manufactory Ltd |
|
|
0.4Mpa SMT Nozzle Cleaning Machine for 1200cc Storage Tank Capacity Nozzle Cleanear,SMTfly-36 Specification:
| Air pressure | Air pressure | Compressed air |
| Intake pressure setting | 0.5～0.55MPa | |
| Injection pressure setting | 0.35～0.38MPa | |
| Nozzle injection pressure | ≤0.4MPa | |
| Consumption of gas | ≤260Nl/min | |
| tube | Intake trachea | ￠12 tubes |
| Drainage tank | ￠8tubes | |
| Cleaning fluid | Cleaning fluid | Industrial deionized water |
| Consumes liquid | ≤300cc/h(5cc/min) | |
| Storage tank capacity | 1200cc | |
| power supply | power supply | AC220～240V |
| plug | 3-Pin | |
| Consume electricity | ≤0.1Kw | |
| surroundings | Working temperature | -5～ (But not frozen) |
| Liquid temperature | 0～ (But not frozen) | |
| Working environment humidity | 10～60%RH | |
| Equipment placed in the environment humidity | 10～60%RH | |
| dust | 0.1mg/m³(There is no conductive dust) | |
| Corrosive gases | Not allowed | |
| other | Dimensions | 655(L) x 560(W) x 475(H) |
| weight | ～(Contains cleaning solution2000cc) |
Contrast with traditional cleaning :
1. Artificial wind guns
① Manual cleaning efficiency is low, the nozzle surface and the lumen can not be cleaned, the hole with a steel wire stabbed easily damaged;
② Cleaning effect difference;
③ The use of cleaning fluid and alcohol may penetrate to cause the reflective layer to fall off.
2. Ultrasonic cleaning
① Low cost and high efficiency;
② Cleaning process can easily lead to collision
between the nozzle, resulting in damage to the surface
of the black coating or fall off;
③ Cleaning fluid on the nozzle surface coating damage, greatly reducing the use of nozzle life;
④ Can not completely clean the nozzle surface and lumen;
⑤ For the latest 01005 and 0201 nozzle can not be a
good cleaning, mainly due to the nozzle hole is too small, ultrasonic cleaning can cause vacuum bubbles can not be discharged and cleaning is not clean.
3. Economic benefits:
① Reduce the purchase cost of the nozzle;
Use CW-36 washing machine can be a good solution to the nozzle
dirty and scrapped, so as to extend the service life.
② Reduce unnecessary labor;
As the machine uses automatic cleaning, so no special person
responsible for all the machine automatically completed the entire
process.
③ Effectively reduce the product defect rate, improve SMT
productivity;
A large part of the production process is due to the dirty surface
of the nozzle and the cavity is too dirty caused by throwing or
placement of displacement, resulting in poor order after welding.
After using the washing machine can make the nozzle always protect
the new state, greatly improve the production efficiency.
SMT Nozzle Cleaning Machine for 1200cc Storage Tank Capacity Nozzle Cleanear,SMTfly-36:
