Fly Mark Fiber Laser Control Card / Engraving Card for Laser Marker
Fiber laser control card can control whole type fiber laser machine
for laser marking and laser engraving .The software EZCAD Support
CO2,YAG,IPG,SPI laser, adjusting currents, frequency, duty ratio in
- Use 25-pins DB25 socket,connect IPG YLP and YLPM laser module via
25-pin cable directly.
- Adjustable digital/analog output used for scan head.
- Mark-on-fly function with an encoder connected.
- Extend axes output:Direction/pulse signals,used to control stepping
motor or servomotor.
- 25 routes general digital signals(TTL compatible), 4 of the IO
ports can be OC IO, can connect with relay.
- Original start signal:Used when marking contents are the same and
high speed is required. Compatible with USB2.0
- Laser Marking
- Laser Engraving
- Rapid prototyping
- Drilling circuit board via holes
- Cutting cloth
- Cutting paper
DB 25 connector is used on the board to connect with fiber laser
Output digital signals for digital scan head.
Support single machine with multi-card.One computer work with 2
pieces of USBLMC card and marking different content.
Extend axis output:Two Dierction/pulse signals,used to control
stepping motor or servomotor for rotary marking and split marking.
8 routes general input signal.(TTL compatible)/8 routes general
Power supply parameters: DC5V/3A
Connector: USB connector/DB connector
Signal: 16 routes general digital signal.(TTL compatible)
Storage temperature: -20℃ ~ + 60 ℃
Working temperature:25℃ ± 10℃
DB9 male/female sockets
USB cable (1.5m)
DB15 male/female sockets
DB25 cable (1.5m)
DB25 male/female sockets
D/A board, CD
Good quality ,work stable ,famous software EZCAD.