|
[China]
Trade Verify
Address: ROOM 223,UNIT 2,BUILDING 2,NO.5MHOUJIE DONGYE ROAD,HOUJIE TOWN,DONGGUAN CITY,GUANGDONG PROVINCE.
Contact name:liang
Dongguan Lixian Instrument Scientific Co.,LTD |
|
Verified Suppliers
|
|
|
Bending Test Machine Equipment summary:
HZ-1007C utm machine is simple in structure and easy to operate,
and can be placed on the workbench for testing.It adopts the
electronic control system, controls the speed regulating motor to
rotate by the governor, then drives the t-type screw pair to drive
the load sensor to rise and fall after the speed changing
mechanical mechanism decelerates, to complete the tensile test of
mask belt and mask raw materials.The force value is output by the
sensor, feedback display, test speed real-time display
Sample quantity: 5 samples are randomly selected for testing Drawing speed: 100mm/min Test method: the connection point between each mask belt and the mask body shall be measured by the static tension of 10N and continue for 5S Test results: the breaking force at the connection point between each mask belt and the mask body should be no less than 10N Tension jig: steel material test hook, strip, width 10mm±0.1mm, thickness 2mm±0.1mm, one end bent into a right Angle hook, hook part length at least 12mm±0.1mm, the hook edge
