GB T 13095-2008 Wall Shocker For Bathrooms Sand Bag Impact Test

1) Purpose of equipment

 This instrument is used to test sand bag impact tests for bathrooms

standards

GB T 13095-2008 . 7.8.1 sand bag impact test

Work : Fill the cloth bag with a diameter of approximately 200mm with a mass of 15±0.5 kg of dry fine sand, suspended by rope, and the sand bag center of gravity to the lifting point distance (1000±10) mm. After moving the sandbag sideways so that the rope is tilted to a 30 degree angle, the center point D of the inner surface of the wall panel is freely impacted and repeated 5 times. Check the siding and connection area. This strength test should be performed after the wet and heat test.

Structural features:

1. The frame structure of aluminum profile is adopted, and the structure is stable and beautiful.

2. Bottom adjustable casters, easy to move;

3. Install a stable angle fixed disk, intuitively visible test angle;

4. Guide slot release device, easy to test

5. The impact height is adjustable and can be test with different test sample tests

Technical parameters:

Sandbag diameter: 200±10 mm

Sand bag weight: (15±0.5)kg,

Sandbag center of gravity to hanging point distance: (1000±10) mm

Test angle: 30 degrees

Test time: 5 times

Standard accessories: sandbag* 1, test stand *1 set, 1 * manual