Active Member
|
[China]
Address: No. 1,Tech 9th Road,High & New Tech Development Zone,Songshan Lake,DongGuan City,Guangdong Province
Contact name:linmei
Dongguan Hust Tony Instruments Co.,Ltd. |
|
|
2m / s Speed Toys Testing Equipment ,Max Pull Froce Test For Wheeled Toys
This 2 m/s Tester is mainly used for test ride-on toys at the speed of toys 2m / s when the value of the barrier imposed by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor belt, the drive wheel until the toy speed of 2m/s and remain stable; the display shows the pressure sensor to the force sensing value, according to ability to judge the value of toy safety.
High precision speed control valve, adjust the working speed of the belt precisely.
High precision force sensor could move up and down.
Standard: ISO 8124-1 2014 5.16.1 Determination of free-wheeling facility
Main technical parameters:
Maximum test load (Sensor) (kg): 100kg
Frequency range: 100～300rpm
Simulation speed: 2m/s (can be adjusting)
Work table size: L×W(cm) 100×200
Dimensions: 2150x1550x1500mm
Weight:450kg
Total weight after package: 600KG, Total Volume: 3CBM
