Home Companies SKYLINE INSTRUMENTS CO.,LTD

ASTM D 2863, ISO 4589-2 0.2—0.3Mpa Oxygen Index Flammability Testing Equipment

Contact Us

[China]

Trade Verify

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

Contact name:Ivy Xie

SKYLINE INSTRUMENTS CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

ASTM D 2863, ISO 4589-2 0.2—0.3Mpa Oxygen Index Flammability Testing Equipment

Country/Region	china
City & Province	dongguan guangdong
Categories	Other Security & Protection Products

Product Details

Oxygen Index Flammability Testing Equipment ASTM D 2863, ISO 4589-2

Introduction

Oxygen Index Flammability Testing Equipment measures minimum oxygen concentration as necessary when specimen combustion. This equipment’s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability.
TI (Temperature Index Tester) measures temperature index of specimen by heated mixing gases on temperature up to 400℃ in the atmosphere oxygen concentration. According to ISO 4589-3, high temperature is best factor to assess combustibility of materials better than Oxygen Index.
Oxygen Index Flammability Testing Equipment lowers the height of glass chimney, gives data result from DAQ System interfaced with PC. And this has simple design and convenience such as foot switch.
This meets the contents of standards like ASTM, ISO, NES, KS and so on.

Standard

According to B/T2406.1-2008,ISO5489-1:1996, ASTM D 2863, ISO 4589-2, NES 714 . ISO 4589-3 NES 715

Scope

Used to assess the combustion performance of plastic, rubber, fiber, foam, film and film and textile materials such as polymer in experimental conditions, namely measure minimum volume of oxygen concentration of percentage for polymer just maintain burning.

Technology parameters

Direct read oxygen value and nitrogen levels by flow-meter
Measurement range	0-80%, resolution: 0.1L/min
Measurement accuracy	2.5 class
Burner tube inside diameter	75mm
Velocity of flow for gas	40mm±10mm/s
Input voltage	0.2—0.3Mpa
Working pressure	0.05—0.15Mpa
Propane (butane) ignition system	the length of flame is 5mm-60mm, can be adjustable automatically
Burning gas	Specified oxygen of GB3863, specified nitrogen of GB3864