Home Companies SKYLINE INSTRUMENTS CO.,LTD

Flammability Test Apparatus , Tracking Index Tester

SKYLINE INSTRUMENTS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

Contact name:Ivy Xie

Inquir Now

SKYLINE INSTRUMENTS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Flammability Test Apparatus , Tracking Index Tester

Country/Region china
City & Province dongguan guangdong
Categories Solar Chargers
InquireNow

Product Details

Tracking Index Tester For Evaluating Leakage Resistance

 

Product introduction

This Tracking Index Apparatus is strictly designed and manufactured in accordance with IEC60112,IEC60335-1, IEC60598-1 and GB4207

Measure the relative resistance to traceability of the surface of the solid electrical insulating material when exposed to impurities containing water at a voltage of up to 600 V.
When the voltage is applied between the electrode means provided on the surface of the material and the electrolyte is dropped between the two electrodes at a predetermined time interval, it is possible to generate an electrical mark in this test case. The number of droplets necessary to cause material damage increases as the applied voltage decreases, and at less than a certain limit, no traceability occurs.
When the material in the highest test voltage is not electric marks, can have different degrees of corrosion, and corrosion depth can be measured. Some materials can burn during the test.

 

Technical Parameters

 Electrode Materials The electrode caput of brass-platinum
 Electrode Distance 4.0mm±0.1mm,60±5°angle
 Test Voltage 100~600V adjustable, displayed value: r.m.s

 Test Current

 

 

 Current limiting 1A±0.1A adjustable,
  displayed value:r.m.s, tolerance of 1.5%

 Electrode Dimensions

 

 

 width: 5mm±0.1mm,
  Thickness: 2mm±0.1mm,
  length >12mm,
  end chisel-edge angle : 30°±2°,platinum.
 Electrode Pressure 1.00N±0.05N
 Dripping Nozzle outer diameter: 0.9mm~1.2mm for solution A
  0.9mm~3.45mm for solution B
 Dripping Interval

 0-99 seconds (adjustable),the time for 44-55/1cm3(adjustable)

drops to fall on the specimen shall be (30±2)min.

 Heigh Drops 30-40mm±5mm(adjustable)
 Control Using single chip microcomputer + touch screen control
 Chamber volume >0.5m³, black interior
 Outer Dimensions W*D*H=1100mm*700mm*1300mm
 Power Supply 800VA ,220V, 48-60Hz

 

 

Hot Products

Automotive Interior Flammability Testing Equipment Horizontal Flammability Tester Application The ...
Tracking Index Tester For Evaluating Leakage Resistance Product introduction This Tracking Index ...
ASTM D6413 Textile Vertical Flammability Testing Equipment With PLC Controller Product information ...
ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester Indroduction 45 ...
IEC60695 Tracking Index Tester for Led luminaires Testing and Electronic Products Product informatio...
Solid and Soft Toys Flammability Testing Equipment Nail Bed Flammability Testing Equipment ...