ASTM D1238 AC220V Melt Flow Rate Meter For Plastic Production

Introduction

The melt flow rate meter is 4.3tft color screen touch operation, PID temperature control, better temperature stability, uniformity.Compared with the common model A, A variety of upgrades and improvements were made. The control part was upgraded to 4.3 touch. The core components were upgraded according to ASTM1238.Built-in program control is more user-friendly.

Meet the standard

ASTM D1238,ISO 1133,GB/T3682

Technical Parameters

1. Extrude the material:

Diameter of drum mouth: 9.5504 0.0076 mm, in accordance with ASTM D 1238-04 5.2

Barrel length: 162 mm in accordance with ASTM D 1238-04 5.2

Cylinder diameter, sensor hole, finish, hardness in accordance with ASTM D 1238

Die diameter: 2.0955 0.0051 mm in accordance with ASTM D 1238-04 5.3

Die opening length: 8.000 0.025 mm in accordance with ASTM D 1238-04 5.3

Piston head diameter: 9.4742 0.0076 mm in accordance with ASTM D 1238-04 5.4.1

Piston head length: 6.35 0.13 mm in accordance with ASTM D 1238-04 5.4.1

2. Standard test load (8 grades in total)

3. Temperature range: room temperature - 320 ℃

4. The constant temperature precision: plus or minus 0.5 ℃,

5. Display resolution: 0.1 ℃

6. Cutting method: players can move or cut automatically

7. Constant temperature time: can work continuously

8. Micro printer automatic printing output

9. Power supply voltage: 1phase AC220V 10% 50HZ

Application

Plastic, resin is used for measuring melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, poly formaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.Melt Flow rate instrument is suitable for the Designation: D 1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer1 "in the Standard of regulation of Thermoplastics Melt mass Flow rate measurement, equivalent adopted of this Standard, and can meet the ISO 1133:Standard test for determination of mass flow velocity of thermoplastic melts.The melt flow rate meter is a desk-top structure with reasonable design, stable and reliable performance, beautiful appearance and convenient operation.

Product features

1. 4.3TFT color screen touch operation control

2. PID dual zone temperature control, heating speed, high constant temperature precision

3. After packing, can quickly restore the constant temperature state

4. The time is accurate to 0.1s

5. Automatic and manual cutting test method can be adopted

6. Equipped with a printer to automatically print out the test results