Tabletop Auto Insertion Force Test Machine 0.01 Minimum Resolution

Automatic Insertion Force Test Machine Maximum Test Load: 5kg, 10kg, 20kg, 50kg For Choice​


1.Tester Introduction

Solve the problem of test fixture for connector and when testing the male and female connectors can be automatically aligned, there will be no unilateral eating problems.

The machine is suitable for a variety of connector insertion force and withdrawal force test, with a patented design automatically find the heart device, the will get Complete accurate insertion force testing by Windows screen settings, simple operation, and all data It can be stored (test conditions, the displacement curve, the life curve, inspection reports ---- etc).

2. Model: XB-1220SR

3. Technical parameters

Maximum test load: 5kg, 10kg, 20kg, 50kg for choice

Minimum Resolution: 0.01

Determination of the maximum height: 150mm

Speed measurement range: 5 ~ 200mm / min

Range of XY axis movement: 0-75mm

Transmission mechanism: ball screw

4. Test purpose:

★ connector hole plug test

★ connector row of plug test

★ Single-Pin connector and plastic Retention Test

★ connector NORMAL FORCE test

★ general compression, tensile failure test

★ constant tension test

★ constant pressure test

★ connector plug life testing

★ dynamic impedance test test

★ shrapnel stress test

5. Machine features:

※ Printable store graphics (plug displacement curve, the life curve, inspection reports, cross traces)

※ test conditions are set by the computer screen member, convenient and fast (with plug stroke, speed, pause time, etc.)

※ test data stored in the hard disk (each piece of data can be stored, unlimited)

※ test report looked content can be modified at any time

※ inspection reports can be edited file conversion to do

※ constant pulling force of pressure setting value percentage protection

※ load dual protection, in order to effectively protect the load cell

※ test data can be tested at any time for correction

※ test unit can be converted

※ automatically do statistics (mean, maximum, minimum)