|
[China]
Trade Verify
Address: LABTECH Building, Lugu International Industrial Park, Yuelu Dist., Changsha, Hunan, 410013, P.R.China
Contact name:Shirley Yang
Changsha Labtech Group Limited. |
|
Verified Suppliers
|
|
|
Rotary evaporator XDSY(2L/3L/5L) Large screen LCD display ● Built in vacuum controller
Product Description
This kind of Rotary Vacuum Evaporator is suitable for evaporation, distillation and separation of chemical experiments. It can be combined with circulating water multi-purpose vacuum pump, circulating cooler and other systems to meet production and experimental conditions. The Rotary Vacuum Evaporator is equipped with a special motor and has a reasonable structural design to ensure the smooth running of the rotary bottle. The temperature control adopts the PID method with high control precision. Both the speed and the bath temperature are digitally displayed for easy identification.
The buckle of the Rotary Vacuum Evaporator is made of stainless acid-resistant steel and has high corrosion resistance. All main metal parts are made of corrosion-resistant high-quality materials to effectively extend the life. In addition, it also has the advantages of small size, light weight, corrosion resistance, high cost effective as well as high precision. It is widely applied in laboratories.
Technical parameter
Model | XDSY-2000A | XDSY-3000A | XDSY-5000A |
Rotating speed | LCD display 0~310rpm | LCD display 0~310rpm | LCD display 0~200rpm |
Evaporation capacity | Max.25ml/min | Max.27ml/min | Max.43ml/min |
Limited vacuum | ≤399.9Pa(3mmHg) | ||
Temp. | Water bath & oil bath dual purpose use, water bath: RT-99℃, oil bath: RT-210℃. | ||
Temp. accuracy | Water bath ±0.5℃,Oil bath:±2℃ | ||
Heating Bath | One time molding teflon compound bath φ23*13cm, with safe handle, volume is moderate, heating quickly. | One time molding teflon compound bath φ26*15cm, with safe handle, volume is moderate, heating quickly. | One time molding teflon compound bath φ29*17cm, with safe handle, volume is moderate, heating quickly. |
Sample bottles | With intermittent left-right rotation and an interval of 0 ~ 60s, it can be applied to dry powder samples. | ||
Lifting | Stilted button, balance lifting 150mm, lifting down end point is 60mm safe distance, to prevent collisions. | ||
Temp. control | Micro computer ON-OFF control, digital display. | ||
Temp. set, display | Membrane key input settings • digital display | ||
Safety | Fuse, heating type dry - burning prevention, dry - burning test bottle automatically up to the highest; Standard time timer, after reaching preset time, automatically shut off your rotavator, for automatic lifting of the main engine, the instrument automatically lift the vaporizer. | ||
Heater | Full closed heater power: 1.4KW | Full closed heater power: 1.5KW | Full closed heater power: 1.8KW |
Sample bottle capacity | 0.25--2L | 0.25--3L | 0.25--5L |
Vacuum sealing gasket | Teflon+ imported PTEF material combined vacuum sealing gasket. | ||
Condenser | Vertical, Three layers of ball mill mouth serpentine condenser pipe, cooling area 0.27㎡ , with drip and backflow prevention design (effectively improve work efficiency). | Vertical, Three layers of ball mill mouth serpentine condenser pipe, cooling area 0.28㎡ , with drip and backflow prevention design (effectively improve work efficiency). | Vertical, Three layers of ball mill mouth serpentine condenser pipe, cooling area 0.48㎡ , with drip and backflow prevention design (effectively improve work efficiency). |
Standard configurations | Sample flask:Pear type bottle 1L * 1pcs,.2LRound bottom
flask * 1pcs, | Sample flask:Pear type bottle 1L * 1pcs,.flange mouth 3L*
1pcs, | 29# standard mouth 1L,(Flange connection F50),5L* 1pcs
each,24# Flange connection *1pcs, |
Operating environment temp. | 5°C~40°C | 5°C~40°C | 5°C~40°C |
Voltage | AC220V/50HZ | ||
Dimension | 71*46.5*51cm / rotary evaporator dimension 66*42*83cm / gross weight 30kg. | 71*46.5*79cm / rotary evaporator dimension 70*43*86cm / gross weight 35kg | 78*69*85cm / rotary evaporator dimension 74*44*96cm / gross weight 42kg |
Optional: built-in vacuum controller (Arbitrary control the vacuum required for the experiment) | |||
WHY CHOOSE US
Our Factory Introduction
We boast a standardized production workshop operated by a dedicated team committed to upholding seriousness and responsibility in every product manufactured. Our R&D division comprises versatile professionals including design engineers, technology specialists, qualified experts, and process control managers. With a stringent adherence to our quality process control system, our qualified specialists rigorously oversee the entire production process, encompassing product design, research and development, testing, production, quality inspection, and packaging.
Packaging & Shipping
Our product packaging has a long-standing track record of reliability. Typically, we utilize plywood boxes or cartons with trays, chosen based on the weight and size of the goods. However, we're flexible and open to accommodating your preferred packaging option.
After-Sale WARRANTY
