|
[China]
Trade Verify
Address: No.601, Buliding B8, Compark, No.2450 Yuelu West Avenue, High-tech Development Zone, Changsha, Hunan, China
Contact name:Unice Du
Changsha Yonglekang Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
8L Soil Powder Fine Grinder Machine 0.75KW With Agate Grinding Jars And Balls
Product Introduction
Planetary Ball Mill for rapid fine crushing of soft, hard, brittle and fibrous material to end fineness <1µm, Planetary Ball Mills are used for fine grinding of soft, hard to brittle or fibrous materials. Dry and wet grindings are possible. They support the daily sample preparation for laboratory- and development usage.
Working Principle
When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Two or four grinding tanks can work together
Applications
Vertical planetary ball mill is widely applied in geology, mineral, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, environmental protection, catalyst, phosphor, long afterglow phosphor, rare earth polishing powder and electronic glass and etc.
Product Display
Technical Features
| Drive Mode | Gear drive |
| Operation Mode | Two or four grinding tanks working together |
| Max Load Capacity | Less than 2/3 of total volume of grinding jars |
| Feed Size of Materials | Soft and crispy material≤10mm,Other materials≤3mm |
| Output Granule | Minimum 0.1µm |
| Rotational Speed Ratio | 1/2 |
| Max.Continuous Operating Time | 72 Hours |
| Materials of Jar | stainless steel.agate,nylon,corundum, zirconia,etc |
Product Parameters
Model | Jar Volume | Max.Powder Capacity | Rotation Speed (RPM) | Revolution Speed (RPM) | Max Noise | Power (KW) | Net Weight | Dimension (mm) |
| YKM-1L | 250ml | 330ml | 35-340 | 70-680 | 60db | 0.75 | 96kg | 830*500*580 |
| YKM-2L | 500ml | 660ml | 35-340 | 70-680 | 60db | 0.75 | 96kg | 830*500*580 |
| YKM-4L | 1L | 1.3L | 35-340 | 70-680 | 60db | 0.75 | 96kg | 830*500*580 |
| YKM-8L | 2L | 2.6L | 35-290 | 70-580 | 60db | 1.5 | 150 | 900*600*640 |
Advantages
1. Stable revolving speed of the gear transmission ensures the
consistency and repeatability of the experiment.
2. Planetary movement principle owns high speed, large energy, high
efficiency, small granularity.
3. Four powder samples from different sizes and different materials
can be produced at one time.
4. The machine is controlled by frequency converter, you may choose
ideal rotating speed according to expected experimental result. The
converter is equipped with device of under voltage and over-current
to protect the motor.
5. The planetary ball mill has functions of timing power off,
self-timing forward and reversal rotating. You may choose freely
any operation modes of one-way direction, alternation, succession,
time setting according to experimental needs, so as to improve
efficiency of grinding.
6. Low center of gravity, stable performance,easy operation,
reliable safety, lower noise, small loss.
7. Safety switch is installed on the machine to prevent safety
accident if the safety cover is opened while machine is running.
Accessories of Grinding Pots & Balls
