Multi Function GB / t2423.17-2008 Simulation Dripping Test Chamber

Multi function simulation dripping test chamber

Multi function simulation dripping test box waterproof test vertical dripping test box structure
♦ The case shell is made of high-quality stainless steel plate with hairline treatment, and the liner is made of stainless steel smooth plate; 2. Large area is visible
The glass door is convenient for observing the condition of the tested sample in the test chamber.
♦ The imported frequency converter is used to control the rotating speed to effectively ensure that the test runs according to the standard.
♦ The bottom of the test chamber adopts high-quality Pu movable wheels, which is convenient for users to move.
♦ It has a 270 degree swing pipe and a 360 degree rotary rod water spray device.
♦ Sample table with adjustable speed.
Water proof test of multi-functional simulation dripping test box vertical dripping test machine meets the standard
♦ GB / t2423.17-2008 salt spray test method
♦ GB / T 2423.18-2000 basic rules for electrical and electronic products Test Ka
♦ GB / t10125-1997 corrosion test in artificial atmosphere_ Salt spray test
♦ GB / t10587-2006 technical conditions of salt spray test chamber
♦ Gb10593.2-1990 measurement method for environmental parameters of electric and electronic products
♦ GB / t1765-1979 test of film making for resistance to humidity, heat, salt fog and weather (artificial acceleration)
♦ Paints and varnishes -- Determination of resistance to neutral salt spray
♦ GB / t12967.3-2008 test method for anodic oxide film of aluminium and aluminium alloy part 3: Copper acceleration
♦ GB / t5170.8-2008 and equivalent IEC, mil, DIN, ASTM and other relevant standards
Operation specification of vertical drop tester for water proof test of multifunctional simulated drop test chamber
First, turn on the power, and then turn on the power switch. If the power light is on, it means that the controller will automatically enter the fixed value stop interface;
1. After the power is turned on, when the control program set by the machine is completed, the machine will stop running;
2. When the set control program is completed, the machine will stop running;
3. Open the door handle, put the test sample on the sample rack, and then close the door;
4. According to the "temi880 operation manual", conduct the test setting operation first, and then enter according to the set operation mode
Test status;
5. In the test, if you want to observe the changes in the box, you can turn on the door lamp switch and know the internal changes through the window
The condition can be opened; the temperature and humidity change in the test box will be displayed on the controller (if there is no humidity requirement in the test
Then the humidity value has no display value).
6. Open the door handle of the box, take out the test sample from the sample rack, check the sample after the test, and record the test
Test condition; this test is completed.
7. After the test, turn off the power switch.
Technical parameters of vertical water dropping tester
Voltage
110V60HZ
Box size
Inner size 1960 * 1960 * 1900mm
External dimension 1960 * 1960 * 2250mm