Home Companies shanghai kerang technology co ltd

50HZ Laboratory Test Equipment , Flexible Cable Flex Tester 0-400V Voltage Loading

shanghai kerang technology co ltd
Active Member

Contact Us

[China] country

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Contact name:iven

Inquir Now

shanghai kerang technology co ltd

50HZ Laboratory Test Equipment , Flexible Cable Flex Tester 0-400V Voltage Loading

Country/Region china
City & Province shanghai shanghai
Categories Electrical Wires
InquireNow

Product Details

Flexible Cables Flexing Tester HDX1302

 

 

Feature:This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a different diameter from pulleys A and B, but all four pulleys shall be so arranged that the sample is horizontal between them. The carrier makes cycles (forward and backward movements) over a distance of 1 m at an approximately constant speed of 0,33m/s between each reversal of the direction of movement. A sample of flexible cable about 5 m long shall be stretched over the pulleys, each end being loaded with a weight. The mass of this weight and the diameter of pulleys A and B are given in following table.

 

Parameters:

Power supplyAC 220V/ 50HZ
Current loading of cores0-25A
Voltage loading0-400V
Testing speed0.33m/S
Testing distance1000±20mm
Suitable cores2-18
Nominal cross-sectional area0.2~4mm2
Diameter of pulleys60,80,120,160,200mm ( Customer optional: Standard equipped 3pcs)
Combined weights0.5kg, 1kg, 1.5kg, 2kg, 2.5kg, 3kg, 3.5kg, 4kg, 6kg, 7.5kg, 8kg
Fault testingCurrent interruption, short circuit between conductors, test and short circuit between the pulley.
 

Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.1 Figure 1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.

Application:It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.

Test sample:Completed flexible cables.

 

Services:


1. Do not worry, it will be best services.
2. Consult us immediately.
3. We will get back to you the first time.
4. It's my pleasure.

 

Primary products:

 

Laboratory Test Equipment

Appliance Test Equipment

Medical Device Testing Equipment

Waterproof Test Equipment

Dust Testing Equipment

Flammability Testing Equipment

Electric Testing Equipment

Impact Testing Machine

Cable Testing Machine

Vibration Test Equipment

Light Testing Equipment

Communication Test Equipment

Plug Socket Tester

Leak Test System

 

We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.

 

Hot Products

Electric Iron Drop Test Equipment HJ0610 Standard: Clause 21.101 of IEC 60335-2-3 Household and ...
Drop tester technical parameter 1. Drop height (mm): 300-1500 2. Measured maximum weight (kg): 65 3. ...
Ball impact tester Small ball impact tester, also known as Wagner impact tester Conform to the ...
Tester For Resistance To Impact By Small-Diameter Ball SH-16 Standard: ISO4532 Vitreous and ...
ipx7 immersion test device 1. Volume: 1000L; 2. Box size: w800 × D500 × h1500mm; 3. Equipment ...
Multi function simulation dripping test chamber Multi function simulation dripping test box ...