Active Member
|
[China]
Address: No.1 Yanfa 1st Road, Songshan Lake High-tech Industrial Development Zone, Dongguan City 523000, Guangdong Province, China.
Contact name:Wu
ATMARS INDUSTRTY CO., LIMITED |
|
|
Temperature Humidity Altitude Test Chamber For Tailored Environmental Testing
ATMARS can provide custom-built altitude chambers for simultaneous testing of temperature, low-pressure altitude and optional humidity conditions.
Our altitude/temperature and altitude/temperature/humidity chambers offer performance flexibility and reliablility for today's mixed-environment testing requirements with an overall temperature range of -70°C to +150°C, optional humidity capabilities of 20% to 98% RH and altitude up to 200,000 feet.
What is an ALTITUDE CHAMBER ?
An altitude chamber combines temperature and low-pressure altitude
with optional humidity to test basic components or sub-assemblies
for a variety of industries, such as defense, aerospace, avionics,
automotive, electronics and others.
Here are two common applications of an altitude test chamber :
- Testing of avionics or other aerospace equipment to simulate
actual conditions it might experience
- Simulation of high-altitude conditions like might be found in
mountainous regions and plateau
And such an altitude test chamber is especially important for defense and aerospace applications where pressure and vacuum conditions are even more intense.
- Altitude Chambers Key Specifications
Workspace Volume: 250L, 500L, 800L, 1000L to walk-in/drive-in sizes
Temperature Range: -70°C to 150°C (at standard atmospheric pressure)
Optional Humidity Range: 20% to 98% RH (optional humidity control when altitude system is
off)
Pressure Range: 0.5KPa to 101.325 KPa (standard atmospheric pressure)
Standard Altitude Range: site level to 100,000 feet (30,480m / 8.28 mm Hg / 8.28 Torr)
Optional Altitude Range: site level to 150,000 feet (45,720m / 1.10 mm Hg / 1.10 Torr) site
level to 200,000 feet (60,960m / 0.169 mm Hg / 0.169 Torr)
Optional extended ranges are also available to simulate sea level
testing when your site is significantly above sea level
Technical Specifications of Altitude Chamber ATPH-1000D Performance is based on an ambient temperature at +25℃, empty load without specimen. | ||
| Model | ATPH-1000D | |
| Performance | Temperature Range | -70℃ to +150℃ (at atmospheric pressure) |
| Temperature Fluctuation | ±0.5℃ (steady state at atmospheric pressure) | |
| Temperature Uniformity | ±2.0℃ (at atmospheric pressure) | |
| Temperature Deviation | ≤±2.0℃ (at atmospheric pressure) | |
| Heat-up Rate | 3.0℃/min | |
| Cool-down Rate | 0.7℃～1.0℃/min (average, at atmospheric pressure) | |
| Humidity Range | 20%RH~98%RH (at atmospheric pressure) | |
| Humidity Fluctuation | ±2.0%RH (at atmospheric pressure) | |
| Humidity Deviation | ≤±3.0%RH | |
| Pressure Range | Ambient to 0.5kPa | |
| Pressure Deviation | ±0.1kPa, when pressure≤4kPa; ±0.5kPa, pressure at 4kPa ~ 40kPa; ±2kPa, when pressure≥40kPa. | |
| Decompression Rate | from ambient to 1kPa ≤30min | |
| Pressure Recovery Rate | 10kPa/min (or Custom) | |
| Workspace Volume | 1000L | |
| Worksapce Dimensions | W1000xH1000xD1000mm | |
| Material | Interior | #SUS304 Stainless steel |
| Seal | Imported silicone seal | |
| Insulation | Expanded foam & fiberglass | |
| Exterior | Cold-rolled steel with powder coated surface | |
| System | Heating | Nichrome resistance wire heater |
| Refrigeration | Mechanical Refrigeration System | |
| Vacuum | Heavy duty vaccum pumb with oil mist eliminator | |
| Noise Level | ≤70dB (A-weighted sound pressure level measured at a distance of 1.0 meter.) | |
| Allowable Ambient Conditions | Temperature: +5℃ to +35℃; Relative humidity: ≤85％RH (No condensation); Air pressure: 86kPa to 106kPa. | |
| Power Supply | AC 380 (1±10%)V (50±0.5)Hz 3 Phase 4 Wire / Plus Earth Wire | |
| ▲Custom options are available. | ||
- Benefits & Features
Heavy-duty metal sheet construction for harsh testing
Temperature, humidity and altitude combined environmental testing
purposes for greater return of investment
Water cooled cooling system with semi-hermetic compressor
Balanced temperature and humidity control system (BTHC)
Robust vacuum system for reliable and flexible tests
viewing window with interior light and cable access ports available
Easy installation and operation (with touch screen controller)
USB, RS-485 or RS-232 serial communications
Optional humidity control when altitude system is off
Altitude test chamber interior size specified by customer
(custom-built)
- Optional Accessories
Number, size, position and shape (round, glove or square) of
through-wall access ports
Additional viewing windows
Additional shelves, custom fixture or basket
Door Interlocks
Inner glass door with glove ports
Custom colors
Water cooled condenser or air cooled condenser
Remote refrigeration system
Boost cooling system, LN2 or CO2
Quiet package
Low humidity
Water purification and recirculation system
Humidity water demineralizer
Desiccant dehumidifier / air dryer
Electronic humidity sensor
Dry air purge / Dry nitrogen purge for low humidity or drying
Oxygen Monitor
- Test Standards Conformance
GB/T 2423.1-2008 Environmental testing - Part 2: Test methods -
Tests A: Cold
GB/T 2423.2-2008 Environmental testing - Part 2: Test methods -
Tests B: Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test
Cab: Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic
products - Part 2: Test method - Test Db: Damp heat, cyclic (
12h+12h cycle)
GB/T 2423.21-2008 Environmental testing - Part 2: Test methods -
Test M: Low air pressure
GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods -
Test N: Change of temperature
GB/T 2423.25-2008 Environmental testing - Part 2: Tests methods -
Test Z/AM: Combined cold/low air pressure tests
GB/T 2423.26-2008 Environmental testing - Part 2: Tests methods -
Test Z/BM: Combined dry heat/low air pressure tests
GJB 150.2A-2009 Laboratory environmental test methods for military
material - Part2: Low pressure (altitude) test
GJB 150.3A-2009 Laboratory environmental test methods for military
material - Part3: High temperature test
GJB 150.4A-2009 Laboratory environmental test methods for military
material - Part4: Low temperature test
GJB 150.6A-2009 Laboratory environmental test methods for military
material - Part6: Temperature altitude test
GJB 150.9A-2009 Laboratory environmental test methods for military
material - Part9: Damp heat test
