Changzhou Welldone Machinery Technology Co.,Ltd |
Verified Suppliers
|
|
1.The available heating resource for choice are steam, thermal oil,
electricity, gas, oil
2.Operation temperature ranges from 40-300℃
3.The temperature can be controlled automatically. Data printer as
an optional choice.
4. Inner chamber of dryer is full-welded. All of of transition spot
adopts circular design and there's no dead angle.
5. Dryer being built with proper seal.
6. There has HEPA (high efficiency air filter) at air inlet vent
and middle efficiency filter at exhausting vent.
7. Each parts of dryer can be assembled and disassembled quickly in
order to clean conveniently.
8. PLC + Touch Screen as an optional choice
9. The whole machine is in conformity with requirement of GMP
1. Robust drying chamber: The drying chamber is made by SUS304 or SUS316L steel plate, fully
welded and mirror polished. The design is robust, simple and
compact which requires minimum maintenance.
2. Uniform drying: Due to the specially designed air distributor, the hot air flow in
each layer of trays is very uniform. The temperature difference
inside the drying chamber is less than ±1 ℃.
3. Energy saving: Most of the hot air circulates inside the well insulated drying
chamber and only part of it is exhausted via the exhaust valve. The
amount of exhaust air is adjustable according to different drying
conditions.
4. Flexibility in heat source: The heat source can be steam, hot water, electricity, thermal oil,
oil/gas/coal/biomass fired hot air generator to match with
different working conditions.
5. Flexibility in drying: Standard sized but different types of trays are available for
different kinds of wet materials.
6. Convenient operation: Control cabinet is installed on drying chamber which can accurately
control and set drying temperature and hot air flow rate.
7. GMP design: The drying chamber is fully welded, mirror polished without dead
corners for cleaning to meet GMP standard.