GBS8219 XVGA BOX/RGB to VGA , RGBS to VGA ,RGBHV to VGA
This device is mainly used for industrial use , if you have
industrial device with old Monitor , but the monitor is already
broken , then what is the best way to get the industrial device to
work ? replace the new system ?
NO!! the industrial device cost is thousands of Dollars at least ,
you just need to purchase this and then connect to LCD or VGA
device , the problem would be solved !!
GBS8219 in the following industrial equipment replacement has
been successfully used
NUM760 display, Balan Shi Bowling monitor display
Glass edging machine monitor gauge machine monitor ship radar
display
Plant of the monitor computer monitor Falak CNC-40 screw drill
display
Falak T42 monitor photodetector machine monitor mixer monitor
display
Radar surveillance monitor GEM80 cold rolled SYS2 display monitor
Hot SYS2 milling display monitor
High-speed drilling machine monitor rubber tires speedometer
displays NEC monitors, bearing milling display,Mitsubishi Monitor
Replacement program for older models display :: various size LCD
panel + GBS8219 Video Converter = new Display (good alternative,
compatible with RBS, RGBS, RGBHV, color and other special rules
sources
Accessories include: manual, 12V power supply, 9-pin video cable
Product Features: RGB switch VGA / RGBS switch VGA / RGBHV to VGA
Model: GBS8219
My company in the industrial equipment under long-term maintenance
and reconstruction of the video on the lessons learned, collected
numerous customer requests and feedback, after years of development
and testing, the introduction of innovative industrial Video
Converter-GBS8219, it can convert video signals to achieve full
automation of industrial operation, to you in terms of industrial
monitor repair and replacement of bringing affordable and
convenient.
Video input signal formats supported: MDA, CGA, EGA, VGA, RGB,
RGBS, RGB sog, RGBHV signal
Video input interface: 3-pin, 4-pin, 6-pin, 9-pin, 12-pin,
three-row 15-pin, 15-pin double-row, 20-pin, 25-pin and other
irregular signal interface
GBS8219 features
1, support 12k to 40k line frequency of the video signal, automatic
identification, field frequency value limit.
2, support for RGB and YPbPr video formats.
3, supports both interlaced and progressive two scanning methods.
4, support vertical resolution from 200 lines to 600 lines,
automatic identification.
5, support any level of resolution, automatic identification.
6, support separate sync signal and the composite sync signal or
the composite synchronizing signal on a video signal, automatic
identification.
7, the output 800 * 600 field frequency of 60Hz standard VGA signal
or customized resolution
Note:9 Pin and BNC input signal, you can choose one of them.
Quick reference for 8219 interface:Definition for I/O interface
9 Pin D-SUB Reference:Definition for Input Channel II
Application for this converter:Definition for Input Channel I
Operation Menu:
(1)H_Position:Moves the position of the display area on the screen.
(2)Width:adjust the width of the menu
(3)V_Position:Moves the position of the display area on the screen
vertically.
(4)Higth:adjust the height of the menu.
(5)Phase:adjust the phase of the menu.
(6)Style:Signal style, RGB(A) Analog,RGB(D) Digital TTL,YUV
(7)Sync:Signal Sync mode:Separate(HV),Composite(S),SOG,SOY.
Automatic
recognition of video input sync, or custom of video
input sync
(8)Resistance:75 ohm or 750 ohm.
(9)Scanning:Interlaced or Progressive.
(10)Exit&Save:Save and Exit.
(11)automatically save and exit:15 seconds, don’t press any key,
the menu
automatically save and exit. (No signal input,
the OSD menu will display)
(12)809 Advance menu:Turn on the 809 power, Press and hold the Menu
buttons
simultaneously until the 809 Advance menu
display, about 5 to 8 seconds.
(13)Restore the factory defaults for 8219:Turn off the 8219
power, Press and hold the
Menu buttons simultaneously until the
kt809/8219 power on,about 3 to 5 seconds.
Control buttons:
Using the Screen Adjustment Menu
(OSD:On Screen Display)
STEP 1
Connected to signal, no display or display color is not correct,
adjust the Signal style ( RGB(A) Analog/RGB(D) Digital TTL/YUV).
STEP 2
809 can automatically identify the sync signal, if the display
distortions that need to manually adjust the sync
signal(Separate(HV)/Composite(S)/SOG,SOY).
STEP 3
If the screen shows elongated, and the overflow to the bottom of
the screen, choose the scanning mode adjusted: Progressive; or
screen display is still only half of the monitor, choose the
scanning mode to adjust to: interlaced.
STEP 4
Adjust the horizontal position, horizontal size, vertical position,
vertical size of the item, adjust the monitor to display properly.
STEP 5
Input impedance: Select the correct input impedance.
STEP 6
Adjustment the phase until the display clearly.
STEP 7
Save and exit
The upgrading replacement for old CNC crt monitor as follows:
replaceable model list
English Website: www.kongto.cc
Chinese website: www.kongto.com
E-mail: szkongto01@foxmail.com
