|
[China]
Trade Verify
Address: NO.371 East XinYing Ave Anping county Hebei, China
Contact name:Aimee
AnPing ZhaoTong Metals Netting Co.,Ltd |
|
Verified Suppliers
|
|
|
Stainless Steel AISI304 Compressed Knitted Wire Mesh Automotive Exhaust Systems
Compressed Knitted Wire Mesh Description
Wire diameter is an important factor in manufacturing materials because it will directly affects flow, dirt holding capacity, pressure drop and cost. Knitted wire mesh demister pad is used to separate in the most efficient manner the very fine enstrained drops carried away by a gas or steam, either at a boiling stage, vacuum evaporation or bubbling of a liquid. In fact there are two phenomena, one mechanical and one physical, but no filtration at all since the size of the held drops has no realtion with the infinitely greater size of the pore or open space. The head loss or gas passage resistance is practically imperceptible, however demisting can reach up to 99% efficiency. Speed of the gas or steam is another factor that conduct influence to the efficiency of the demisters: A demister reaches the highest efficiency when the speed of a gas or steam ranges between certain limits.
Compressed Knitted Wire Mesh Advantages
Increasing throughput
Downsizing new vessels
Improving product purity
Cutting operating costs
Reducing environmental pollution
Reducing downstream corrosion
Increasing recovery of valuable liquids
Compressed Knitted Wire Mesh characteristic
Isolators with relatively constant natural frequencies within the load range; 15 to 22 Hertz.
Used for compression, but can accept occasional tensile loads.
Maximum excitation amplitude :± 0.5mm.
Temperature range :-90 ° C to +1000 ° C
Compressed Knitted Wire Mesh Specification
Product name | Stainless Steel AISI304 Compressed Knitted Wire Mesh Automotive Exhaust Systems |
Material | Stainless steel AISI304 304L 316 316L 321,310S,copper,pure
silver,tinned copper,monel,pure |
Wire diameter | 0.20mm |
Wire shape | Round wire,Flat wire |
diameter | 3.8mm,5mm,10mm ,15MM,25mm,30mm,35mm,40mm,300mm,400mm,500mm,600mm,800mm,1000mm |
surface Shape | corrugation,twill shape,“W shape”,herringbone |
Uasge/application | Generally used in automotive catalytic converters, exhaust systems, noise suppression and shock absorption devices, air conditioning devices, filters, filter components, Marine turbine engine filters, droplet filters, EMI/RFI shielding, industrial filtration, etc |
High temperature resistance, corrosion resistance, acid and alkali resistance, durable | |
Hole | 2*3mm,3*3mm,3*4mm,4*5mm,5*6mm |
Color | Silver,yellow,black,etc |
Woven,knitted | |
OEM/ODM | Yes/OK |
ISO9001:2015 | |
Help packing |
Compressed Knitted Wire Mesh technology
knitted wire mesh (plain, twill, mat-shaped dense braided mesh, etc.), or copper plate punched into copper plate punched mesh, which can also be made into braid sleeve.
