Active Member
|
[China]
Address: Room 301-302, 3rd Floor, Comprehensive Building, Tsinghua Information Hi-tech Park, North Science Park, Nanshan District, Shenzhen ,China 518052
Contact name:Ava Tian
Shenzhen Kingwo IoT Co.,Ltd |
|
|
MT13 is GSM wide voltage Real time monitoring with external connectors mini vehicle tracker,which with multiple connectors that support speakers,mics,sensors and other external accessories.
* Real-time tracking monitoring
* LBS Positioning
* Remote listen in
* SOS
* Power off alarm
* Intelligent remote control
* Mileage statistics
* Camera(Optional)
* Fuel sensor(Optional)
| Mechanical | Size | 98mm (L) x 56mm (W) x 18mm (H) | |
| Weight | 80±5g | ||
| Interface | RS232 interface | ||
| Data transmission | Packet data GPRS and SMS | ||
| Positioning method | GPS | ||
| Storage | 4MB FLASH, up to 20000 GPS data storage | ||
| Power | Working Voltage | 9-36VDC | |
| GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | ||
| Cellular | Module: QUECTEL MC25 GSM/GPRS 850/900/1800/1900 MHz Working voltage: 3.3 – 4.5 V (recommend 4.0V ) Transmitted power: 2 W,850/900 MHz 1 W,1800/1900 MHz | ||
| Chipset | STM32F070CB | ||
| Battery | Built in 850mAH battery | ||
| 3-axis G-sensor | For vehicle motion and static status detection | ||
| LED Indication | 2 LED lights for GPS and GSM | ||
| Antenna | Cellular | Internal | |
| GPS | Internal | ||
| Environment | Working Temperature | -20℃ ~ +70℃ | |
| Storage Temperature | -40℃ ~ +85℃ | ||
| Humidity | 5%～95%(no fog) | ||
In case of emergency , press and hold the SOS button for 3 seconds to activate SOS alarm.Default alarm method GSM+SMS+CALL, which means the SOS alarm message will be uploaded to platform 1st and sent to SOS number. Finally device will call SOS numbers in a loop(Maximum 3 times) till someone pick up.
When MIC is connected while speaker is not, use pre-set SOS number to dial the device, after 10 seconds, devices enter into one way model automatically, the caller can hear the voice inside the vehicle.
When the vehicle is stolen, a command can be sent from the backend or by SMS
Make sure ACC cable is correctly connected, and a center number need to be set 1stly, for safety consideration, only center number can send command to cut off power and fuel or restore the device.
