Active Member
|
[China]
Address: Room502, Floor 5, Zone B, Meiku Industrial Park, No.117 Zhenxing Road, Shuishechong, Wanjiang District , Dongguan 523000, China
Contact name:layla.yu
Dongguan Kebao Barcode Technology Co.,ltd |
|
|
35mm*30mm 45mm*40mm 40mm*40mm black white color solid hot ink roller
Features:
Low cost, convenient for use, printing image distinct, hard to fall off, quick-dry, no ink pour pollution, strong adhesion, easy to change, print more times, non poison.
Most important, matched for any type code machine, can make it
quick printing.
* broadly apply to 380 Solid Ink mark Machine, 980,1000 sealing
machine, identify machine, expiry date printing ink roller coding
machine.
* easy-operated, writings legible, hard fallen out, quick-drying,
no- pollution, many times for printing available, low-cost.
* extensively apply to foods, pharmacy, drinking industry, for
various flexible packing, pages plastic bags printing, print
letters, number, expiry date, batch no, weight, quantity etc.
* apply to PVC, PET, PPC, Paper, carton, plastic bags
* Colors: black( normally use),white,red,blue
Common size:
| Common dimension | |
| 35mm*10mm, 35mm*12mm, 40mm*40mm
| 36mm*10mm, 36mm*12mm, 36mm*16mm 36mm*32mm, 36mm*36mm, 36mm*40mm |
| 40mm*40mm | 48mm*55mm, 46mm*60mm |
Each size will be produced by moulding, if you need special size,
will need to customize
Usage Method: Put ink roller into preheater for 10-15 minutes( if not preheater,
it’s ok to put it directly in ink roller printer for preheating,
adjust space between code printer word wheel and hot iron roller
into optimum condition.
| fault | reason | solution |
| Printing times lack | 1. low temperature 2. preheat for roller and character wheel is not enough 3. Pressure between roller and wheel is small | 1. raise the temperature in a approved scope 2. Preheat for 15 min before start 3. modulate the gap |
| Ink pollution | 1. word wheel dirty 2. roller temperature too high | 1. change the character wheel 2. decrease the temperature to appropriate one. |
| Grooves on ink roller | 3. Preheat is not enough | 1. preheat above 15 min |
