Fast Cooling 29.4m3/Min 0.8Mpa Industrial Screw Air Compressor

29.4m³ / min High efficiency fast cooling Screw Air Compressor 185kw 250hp 0.8 Mpa

Advantages of screw air compressor

   Our screw air compressor is engineered for its durability. Larger rotors allows for bigger bearings, 30%-50% slower rotor speeds results in less power consumption, lower sound levels and reduced maintenance cost .

   Our one piece bearing housing ensures both rotors are ridgely held by the bearings in proper alignment during transient periods such as machine startups/shutdowns or load changes. SKF bearings and SEALTECH bearing seals are utilized in all airends

   All of our compressors have the latest inlet valve, airend air discharge port and oil inlet port design

   Lower sound (dBA) emission level than most of our competitors results in less sound pollution

   The axial and rotational loadings are supported by different bearings for better stiffness and less transition noise

   Simple package design requires only minimum maintenance for optimum performance

   Continuous cooling and circulation of lubricating oil, ensures long airend operating life

Specification                                                                                                                                                                                                                

 Unique design

Compressed Air Vessel:Reduce the pressure ； energy conservation ； Low oil content ,ensure that the oil content in the air is less than 3ppmand high quality air . 

Oil gas separator with built-in oil separation core in new structure .

High efficiency air end , low noise bearing and oil mist cooling are adopted to maintain stable operation of the chamber .

Large surplus heat dissipation area design, strong heat dissipation effect, avoid high temperature shutdown ； Intelligent cooling fan design, can automatically start cooling according to air temperature.

Adopt stainless steel pipe, high temperature and low temperature resistance

electric motor:Adopt imported high quality electrical equipment to ensure the normal operation of the machine.

There is no intermediate transmission, so there is no energy loss

The larger rotor runs at a lower speed, with higher efficiency and further reduces energy consumption

It avoids the situation that the hand is unbalanced in the belt drive, easy to generate heat, easy to break, frequent belt replacement, and often need to readjust the levelness of the pulley and the tension of the belt

Due to the coaxial transmission of elastic coupling, the force is balanced, the vibration is reduced, the reliability is increased and the maintenance cost is reduced

Our services 

Pre-sales service

Inquiry and consulting support.

Samples testing support .

View our Factory.