Jiangxi Kapa Gas Technology Co.,Ltd |
Verified Suppliers
|
|
7.5KW / 15HP Intelligent High Efficiency Industrial Air Compressor
1.71m³ / min 1950*840*1745
Desciption
Adjustable Boom
Specification
Model | kp11KW-0.8 |
(M³/Min/Mpa) | 1.71/0.8 |
Power Kw/ HP | 22KW/30HP |
Ambient Temperature ℃ | 2℃-45℃ |
Cooling Mode | Air Cooled |
Discharge Temp | ≤Ambient +15℃ |
Noise Level Db(A) | 70±2 |
Driven Mode | Direct Drive |
Power (V/Ph/Hz) | 380V/3/50Hz |
Starting Mode | VFS |
Dimension (mm) | 1950*840*1745 |
Net Weight (kg) | 530 |
Out let Diameter (inch) | RP1 |
⊙ Schematics
1. Air Filter | 9. Oil Temperature Control Valve |
2. Air-in Easing Value | 10. Oil Filter |
3. Principal Screw Machine | 11. One-way Shut-off Valve |
4. Oil Air Separator | 12. Pressure Gage |
5. Oil Air Separating Filter Core | 13. Safety Valve |
6. Minimum Pressure Valve | 14. Vent Valve |
7. Radiator with Aluminum Alloy Fans | 15. Compressed Air Dry Separator |
8. Return Check Valve | 16. Motor |
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the
support of the ball bearings and roller bearings as a result. The
damage and the cost are lowered and the service life is extended.
Some force is counteracted by the axial force generated by the
bevel gear. So the load on the bearings of the master machine is
lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can
integrate the electromotor with flange, shaft coupling box-gear
box. and the master machine into one in such way the master machine
and the electrometer are aligned forever in the transpiration. The
SRC series compressors equipped with effective and fully sealed
air-cooling electromotor.