|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview of the machine:
Pharmaceutical Factory Capsule Filling Machine Manufacturer Powder Capsule Filling High Speed Capsule Filling Machine
Technical parameters:
| Output | 1250Capsules/min |
| No.of segment bores | 9 |
| Suitable fof capsule | 00#-5# |
| Total power | 5.6Kw(Standard configuration) |
| Overall weight | 1200Kgs |
| Overall diemensions | 1085+(435)mm*1015(+252)mm*1880mm |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤6m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Copper collar:
 | 1.Hard column: stable particle weight, loading amount close to the
maximum value, one or two groups of filling rods have obvious
beating, the adjustment range is too small, the machine load is
large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small
load, small wear of parts. Half column: sometimes appear puff powder particle weight and
light. 3.Scattered sand: leakage, dirty machine table, installation
difference. The gap type copper ring can be replaced with the
sealing type. |
 | According to the material situation, the company provides the optional replacement copper ring |
Vacuum separation mechanism:
Modular powder filling mechanism:
Other performance:
