Active Member
|
[China]
Address: No.410, Donghuan Road,Shiajing ,Baoan District Shenzhen China
Contact name:Tina
Shenzhen Onetop Technology Co.,Ltd |
|
|
Battery Pack Testing Equipment Charging and Discharging Aing Cabinet,battery test system
Function Features:
The charge discharge aging system mainly includes PC software, USB hub, router, aging instrument. The core is aging instrument, aging 32 bit ARM chip was chosen as main control chip, compared to the traditional microcontroller in the execution speed greatly improved, measuring voltage and current accuracy is higher, through the RS232, network transmission data.
1. With constant current and constant voltage charging function
2. with constant current discharge function
3. fully meet the battery charge and discharge with mouth and separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+ P- C-). At the same time, the CH+ P+ P- can be used to protect the negative plate discharge by aging the positive plate charging protection.
4. by charging and discharging the battery, the charge protection and discharge protection of the battery can be detected.
5. charge and discharge the battery, record the charge capacity and discharge capacity of the battery.
6., anti reverse protection function, upper and lower voltage set protection, safety discharge current protection (maximum current 20A);
7. Within 10 machines, through the serial port to connect the PC computer;; more than 10 sets of equipment, you can use the network connection mode. In this way, PC computer only need to provide a network port, you can control less than 254 instruments.
8 aging instrument software system using the classic mature C/S model
9. based on the Windows interface, the use of MYSQ database storage test data, and can export curves.
Input power:AC 220v+/-10%/50Hz
Voltage:10-100V
Current: charge range:0-10000mA
discharge range:0-20000mA
Charge:Min10mA
Discharge power :below 1400W
Time : Patrol time :under 5s
Timer range :0-999hours /step
| Input Power | AC 220V ±10% / 50Hz | ||
| Voltage | measuring range | 0~70V | |
| precision | ±(0.2% of reading + 0.2% of range) | ||
| Current | Charge range | 0~5000mA | |
| Charge accuracy | ±(0.2% of reading + 0.2% of range) | ||
| Discharge range | 0~10000mA | ||
| Discharge precision | ±(0.2% of reading + 0.2% of range) | ||
| Charge | Constant voltage cut-off current | Min 10mA | |
| Volume | precision | ±1‰ | |
| Power | discharge power | ≦800W | |
| Time | Patrol time | <2S | |
| Time range | 0~999hours/step | ||
| Data recording interval | ≥5S | ||
| Median machine version | 1.1 series | ||
| Charge | charge mode | Constant current and constant voltage charging | |
| cut-off condition | Voltage, current, relative time, overcharge protection | ||
| Discharge | discharge mode | constant-current discharge | |
| cut-off condition | relative time, voltage, discharge protection | ||
| Circulate | Range of cycle measurement | 1~999 times | |
| Single cycle step number | 100 | ||
| Voltage and current sampling | Four wire connection | ||
| Noise | <50dB | ||
| Data base | Managing test data with My SQL database | ||
| Host computer communication mode | Based on TCP/ IP protocol, serial port | ||
| Data output mode | EXCEL,TXT,chart | ||
| CI | ethernet | ||
| Number of channels per cabinet | 12 | ||
| Case size | W*D*H:45*30*17(cm) | ||
| Cabinet size | W*D*H:90*60*190(cm) | ||
Our Company
Shenzhen Onetop Technology Co Ltd , is a manufacturer which
combines R&D and marketing ,we have professional R&D team
as well as proficient stuff ,and has been specializing in
researching and producing high quality lithium battery machine for
10 years . Our main products ranges from 18650 battery pack
assembly machine ,Power Battery PACK assembly machines ,Power Bank
Assembly machine,Mobile Phone Battery assembly Machines,Battery
safety test equipment,Injection molding machine,Molds, Molding
materials, machine parts, etc
We keep in place with the word ,we adopt lastest technology and
design ,our Onetop series battery machine stands out in the same
industry area ,they are of national advanced technologycal level
and have been identified by experts from Shenzhen Science &
Technology and Information Bureau .Up to now ,we have obtained many
inventions patents ,practical new patents ,and own independent
intellectual property rights
.
With the increasing development ,We have created two workshops to
manufacture battery machines and injection molding machines
Through our efforts, the Automatic Battery PACK Assembly machines
are now widely used in Mobile phone,Power bank,Laptop,Electric
bikes,Electric vehicle,solar street lights,Solar energy
storage,Banks,LED devices,Health Equipments ect,the low-pressure
injection molding machines are now widely used in PCBs, sensor
products, wiring harnesses, medical electronic products, etc. In
addition, OEM/ODM services can be provided to customers worldwide.
Our products enjoy high quality and guarantee all-weather
after-sales service, thus winning our 70% market share.we look
forward to cooperation with the customers all over the world .
Our Main product
1. Automatic Battery PACK Assembly Line
2. Power Battery PACK machines
3. Power Bank Assembly Line
4. Battery safe test machine
5. Injection Molding Machine
Packing and shipping
*Be Packed by Wooden Box
*Lead Time: Standard Machine: 7-10 working days
*Customized Machine: 30-35 days
Our Service
● Pre-sales
1) Inquiry and consulting support. All will be replied in 12 hours.
2) View our Factory and testing the machine, demonstrate how the
machine work.
● After-Sales
1) Training how to install the machine, training how to use the
machine.
2) Engineers available to service machinery overseas
3) 1-year guarantee ( free maintain in a year)
4) Replacement parts and other accessories provided
Contact us
Ms.Tina (Sales manager)
Cel/Wechat/whatsapp:+86-13543252590
Email: tina@battery-machines.com
Add:No.410,Donghuan road,Shajing,Bao'an district,Shenzhen,China
