Langfang Jingshark Filtration Co., Ltd. |
|
Magnetic filter for iron removal in the pharmaceutical industry
Describe
Strong magnetic filter/separator
It is composed of several strong magnetic rods designed according
to the special magnetic circuit, installed in the pipeline, which
can effectively filter the magnetic metal impurities in the liquid
transportation process. Metal particles with a diameter of
0.5-100um can be absorbed by the magnetic rod. This magnetic filter
achieves automatic and intelligent control of large flow
processing, uninterrupted filtration, automatic backwashing and
waste slagging. It is dedicated to filtering ferrous impurities and
can efficiently remove all kinds of liquids, slurries and gases.
Large amounts of iron filings, iron powder and other ferromagnetic
impurities.
Working principle:
The filter system works normally: when the system is working
normally, the material flows into the magnetic rod group. Due to
the action of the magnetic field, the magnetic particles will be
adsorbed on the wall of the magnetic rod tube, and the non-magnetic
particles are carried into the next process by the liquid;
The filter system automatically demagnetizes and discharges the
slag: when the running time reaches the set value, close the feed
valve and the discharge valve, the material passes through the side
stream, and the system enters the slag discharge process. At this
time, the system opens the intake valve to lift the magnetic rod,
and after demagnetization The impurity particles fall into the
bottom of the tank and are discharged with the liquid;
Automatic cleaning of the filtration system: close the air valve
and open the cleaning valve during spray cleaning. The water in the
bypass is sprayed into the equipment through the water pump to
clean the internal cavity of the equipment. After the magnet is
reset, the feed valve and the discharge valve are opened, and the
bypass valve is closed. Enter normal working state;
Product name | Magnetic liquid filter |
Model: | JSYL-CC |
Specification: | DN32~300 |
Shell material: | 304 304L 316 316L |
Sealing gasket: | Nitrile rubber, PTFE, metal gasket |
Ambient temperature: | 0°C to 120°C |
Nut bolt: | 304 304L 316 316L |
Connection mode: | Flange connection threaded connection |
Working pressure: | 0.1-2.5MPA |
Application range:
Used in food and beverage, metal processing, pharmaceuticals,
ceramics, paper, cosmetics, fine chemicals and other industries to
protect key equipment from iron particles.