Active Member
|
[China]
Address: No.389,Hongmen Industrial Park,Jihua RD,Bantian ST,Longgang DIST,518100,ShenZhen City,Guangdong Province,P.R.China
Contact name:Saul Xiong
JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED |
|
|
Card Reader Technical Parameter
| Size(L*W*H) | 86*86*42mm |
| Material | Case:PC identify panel:tempered glass |
| Interface | Wiegand26,34 ,RS485,RS232,USB,TCP/IP optional |
| Decoding support | QR,one dimensional code |
| Voltage | Support 4-15V Wide voltage input |
| Current | 800mA |
| Reading directions | Camera centric slant 45° |
| Reading speed | <200ms |
| Reading range | 0-20CM |
| Reading feature | auto-induction, beep hint |
| Light source | With LED light source itself,anti-highlight interference |
| Decode Mode | Image decoding |
| Application environment | Temperature:-20~70℃ Humidity:10%~90% |
| Operate system | Windows(xp 7 8 10),Linux |
| Indicating status light | Red-Work,Green-Feedback,Light Green-Internet |
| Reading range | 3-6CM |
| Reading card type | EM or Mifare card |
Restore Factory Settings: Use sharp objects inserted into REST hole of QR code reader backside, release till the QR code reader automatically restart.
Features:
1.DC 12V 1000MA
2.EM card or Mifare Card for choose
3.Identify paper or screen QR Code
4.Support 26/34 weigand output to third party Access Control system
5. RS232, RS485,USB virtual keyboard, USB virtual Serial port, HTTP output, MQTT output optional
Wire connection:
VCC:DC12； GND:DC12；D0:DATA0；D1:DATA1； LED:LED indicate； BEEP:Sound ；
TX/R+:RS232+/RS485+；
RX/R-:RS232-/RS485-；
SPK-,SPK+:not define；
RJ45:connect to network, PC software setting reader parameter；apply to HTTP mode
micro-USB:For USB virtual keyboard and USB virtual serial port mode communication.
mes New Roman';mso-fareast-font-family:Arial;font-size:12.0000pt;" >HTTP output, MQTT output optional
Note:
1: do not connect the power to the SPK+ and SPK- ports;
2:Wiegand output, QR code shall comply with the principle of combination of 1hexadecimal number 0~F, the QR code in accordance with this principle, controller can receive the card data; QR code not in accordance with this principle, the controller can not receive the card data;
3: Wiegand output, default QR code output is decimal number.
