Honda Civic Front Lower Control Arm 51350 TEA T10

51350 - TEA - T10 Suspension Front Lower Control Arm for Honda Civic Car

Specification

Description

In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel.

The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. It can thus control the position of the outboard end in only a single degree of freedom, maintaining the radial distance from the inboard mount. Although not deliberately free to move, the single bushing does not control the arm from moving back and forth; this motion is constrained by a separate link or radius rod.

This is in contrast to the wishbone. Wishbones are triangular and have two widely spaced inboard bearings. These constrain the outboard end of the wishbone from moving back and forth, controlling two degrees of freedom, and without requiring additional links.

Most control arms form the lower link of a suspension. A few designs use them as the upper link, usually with a lower wishbone. The additional radius rod is then attached to the upper arm.

More Control Arm Models

Density of alurminium allay is enhanced for better loading with

Precision aliminum low - pressure casting process

Adopting automatic protection welding , robot technology to ensure product consistency and

Weld strength , make the product looks more attrective

Natural rulbber from thaland malaysia , shore harness 50 - 55 degree with wold's most advancend injection

technalogy ,soleads to quality improcement and effectice cost control .

Our Advantages

1. High Quality, Competitive Price
2. Small Quantity Orders Are Accepted
3. Best After-sale Service