24V Plastic Honda Led Headlight 33100 TET H11 Auto Head Lamp CIVIC FC1

33100 - TET - H11 Honda Led Headlight HEADLIGHT For CIVIC FC1 / 7

Installation techni9ques

Disassembly and assembly steps of car headlights. After opening the engine compartment cover, you can see the dust cover behind the headlight assembly and screw it directly in the direction of the screw. After that, you can see the bulb base in the headlight assembly, hold the wire clamp spring next to the base, and when the clip is released, you can take out the light bulb and plug in the power supply of the light bulb. When unplugging the socket and unplugging the power socket of the bulb, the force should be moderate to avoid loosening the socket wiring or damaging the bulb plug. After unplugging the power interface, remove the waterproof cover behind the light bulb. The waterproof cover of the headlights is mostly made of soft glue. Some models are equipped with a soft plastic waterproof cover without any difference. It only takes a little force to see the waterproof cover broken off. Follow the steps of removingthe old light bulb when installing: pinch the wire spring to insert the light bulb into the reflector, aim at the installation position and release the spring to fix the bulb. When covering the waterproof cover, make sure that the edge and fixation of the waterproof cover fully fit. Finally, connect the headlight power socket, and the operation of replacing the headlights is completed.​