Active Member
|
[China]
Contact name:
Please input your companyname! |
|
48V 0.7A poe injector passive gigabit PoE, poe ip camera
48V 0.7A poe injector passive gigabit PoE, poe ip camera
| INPUT | VOLTAGE RANGE | 110 - 240VAC |
| FREQUENCY RANGE | 47~63Hz | |
| AC Input Current | 0.7A Max | |
| Protection | Internal Primary Current Fuse ,Internal Primary Current Fuse | |
| OUTPUT | DC VOLTAGE (Range) | 48V DC |
| VOLTAGE RANGE | ±5% | |
| OUTPUT CURRENT | 0-0.7A | |
| Combined Line and Load Voltage Regulation | Combined Line and Load Voltage Regulation | |
| Ripple& NOISE | 1% Vp-p max. | |
| Transient Response | 0.5ms for 50% Load Change Typical | |
| PROTECTION | Over-Current Protection | 120%~150% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection | 25.2~32.4V Protection type: Shut down output voltage on to recover | |
| Short Circuit Protection | RTH>70℃ Protection type: Shut down output voltage, re-power on to recover | |
| ENVIRONMENTAL | Thermal Performance | Operating Temperature 0° C to 40° C |
| STORAGE TEMPERATURE | -30%~85%RH | |
| Altitude | 0-10,000 feet | |
| Relative Humidity | Non-Condensing 5% to 95% | |
| General Specifications | Dielectric Withstand | Primary-Secondary 3000VAC |
| Spacing | 6mm Primary-Secondary | |
| Hold-up Time | 18ms min. Typ. at120VAC | |
| Approvals and Standards | Designed according to CE,UL | |
| Leakage Current | Less than 250 uA | |
| Efficiency | 80% min. | |
| DIMENSION | Please contact us for dimension For example, desktop power supply: 121×58×33mm | |
| WEIGHT (Range) | 170g (60g - 350g) Please contact us | |
| PACKAGING | PE/Poly bag, White box, Giftbox, or Customized | |
| CONNECTOR | PLUG | 5.5mm x 2.1mm 5.5mm x 2.5mm Or Customized |
| CABLE | UL2464 22AWG/2C 1.2M/1.5M/1.8M or Customized BLACK |
POE4800070G (48V0.7A passive gigabit PoE)
INTRODUCTION:
The high power passive 10/100 /1000Base-T PoE Injector can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better).The output power of per port is up to 72W, which can serve as an outlet for a PoE device (powering via RJ45 port).
