|
[China]
Trade Verify
Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162
Contact name:Annie
CHANGZHOU JKONGMOTOR CO.,LTD |
|
Verified Suppliers
|
|
|
Φ100 3KW ER20 Air / Water Cooled Ac Spindle Motor 220V / 380V CNC Milling Machine
CHANGZHOU JKONGMOTOR CO., LTD sells 2 types of spindle motors for CNC machine, wood carving/engraving machine, which are air cooled type spindle motor from 800W to 7.5kW and water cooled spindle motor from 1.5kW to 6kW. They features with simple and compact configuration, stable performance, reasonable price, high precision bearings, long service life and high speed to 24000rpm. Working at 3 phase 300Hz/400Hz 380V AC power supply, need to be equipped with VFD to use.
Provide:
1. water cooling:800w,1.5kw,2.2kw,3kw,4kw,3.2kw,4.5kw,5.5kw
2 .air cooling: 800w,1.5kw,2.2kw.3.5kw,4.5kw,6kw,7.5kw,12kw
Features:
Cooling: Air cooling, Power: 3kW, Current: 10A, Collet: ER20
Voltage: 220V/380V AC at 300/400Hz, cooled spindle motor speed: 1-18000/24000 R/min
Fast response, strong overload capacity, low noise and high mechanical precision.
Tight sealing and two-layer dustproof design.
Cooling: Water cooling, Power: 3kW, Current: 10A, Collet: ER20
Voltage: 220V/380V AC at 400Hz, cooled spindle motor speed: 1-24000 R/min
Fast response, strong overload capacity, low noise and high mechanical precision.
Tight sealing and two-layer dustproof design.
| Model | Speep (RPM) | Power (KW) | Voltate (V) | current (A) | frequency (HZ) | weight (KG) | cool | Phase |
| JK1 Φ65 *183 | 1-2.4 | 0.8 | 220 | 6.5 | 400 | 2.5 | air | 3 |
| JK2 Φ65 *208 | 1-2.4 | 1.5 | 220 | 8 | 400 | 3.2 | air | 3 |
| JK3 Φ80*200 | 1-2.4 | 1.5 | 220 | 8 | 400 | 3.7 | air | 3 |
| JK4 Φ105*300 | 1-1.8 | 3 | 220 | 10 | 300 | 8.3 | air | 3 |
| JK10 89*98*300 | 1-1.8 | 3 | 220-380 | 10 | 300 | 8.8 | air | 3 |
| JK12 89*98*320 | 1-1.8 | 4.5 | 220-380 | 12 | 300 | 9.5 | air | 3 |
| JK5 Φ65*165 | 1-2.4 | 0.8 | 220 | 6.5 | 400 | 3 | water | 3 |
| JK6 Φ80*160 | 1-2.4 | 1.2 | 220 | 7 | 400 | 4 | water | 3 |
| JK7Φ80*170 | 1-2.4 | 1.5 | 220 | 8 | 400 | 4.5 | water | 3 |
| JK8 Φ80*200 | 1-2.4 | 2.2 | 220 | 8.5 | 400 | 5.7 | water | 3 |
| JK9 Φ100*230 | 1-2.4 | 3 | 220-380 | 10 | 400 | 10.2 | water | 3 |
Electrical Specification:
Matching inverter: 3kw inverter
Dimensions: (Unit=mm)
Φ100 ER20 AIR COOLED:
Φ100 ER20 WATRE COOLED:
.
Common faults and troubleshooting methods
| Trouble | Cause | Solution |
| The voltage axis does not run after power-on | 1. The inverter has no output or the setting is incorrect | Check that the output setting of the AC is correct |
| 2.The plug is not inserted | check the plug and the connection | |
| 3. The plug connection is not good | ||
| 4. The spindle wire package is burned out | replace the wire package | |
| Run for a few seconds and then shut down after starting the machine | 1. Water damage to the insulation of the cable package | drying the cable package |
| 2. High temperature causes insulation damage to the wire package. | Replace the wire package | |
| 3. Overcurrent protection caused by phase loss operation | Check motor wiring | |
| 4. Start-up time is too short | Extended acceleration time | |
| After turning on for a few seconds, the motor emits smoke or the casing becomes hot. | 1. The inverter has no output voltage, overrate and the electric spindle brand voltage, and the frequency does not match. | Check the basic frequency setting of the inverter. |
| 2. Incorrect setting of the inverter | Reset the inverter | |
| 3. Waterway problems | Check if the waterway is unblocked | |
| The nut is loose when starting | Wrong rotation | Change direction by brand |
| High sound absorption and vibration | 1. The bearing wears out and produces weight. | Replace the bearing |
| 2. Damaged parts accuracy affects dynamic balance. | Check dynamic balance | |
| 3. The spindle has a big runout. | Replace the spindle | |
| Nuts loose during shutdown | Downtime is too short | Extend the deceleration time |
