Active Member
|
[China]
Address: Chengchang Industrial Park,Huangtu Town,Jiangyin City,Jiangsu Province,China
Contact name:Antonio Zhou
Jiangsu Liangyi Co.,Limited |
|
|
We are professional Automotive Pressure Sensors transducers Transmitters 17-4pH(1.4542,,17-4 pH,17/4 Ph,SUS 630)Pressure Port Sensor housing factory from china
Chemical:
| C | Si | Mn | Cr | Ni | Cu | Nb | S | P |
| ≤0.07 | ≤1 | ≤1 | 15.5-17.5 | 3.5-5 | 3-5 | 0.15-0.45 | ≤0.03 | ≤0.035 |
Introduction:
17-4PH alloy is a precipitation of copper, niobium / columbium
constituted hardening martensitic stainless steel. This level has
high strength, degree (up to 300º C / 572º F) and anti-corrosion
properties. After heat treatment, the mechanical properties of the
product more perfect, can reach up to 1100-1300 mpa (160-190 ksi)
of compressive strength. This level can not be used above 300º C
(572º F) or under very low temperatures, its atmosphere and dilute
acid or salt has good corrosion resistance, corrosion resistance
and its 304 and 430 the same.
Applications:
• offshore platforms, helicopter deck, other platforms
• Food Industry
• Pulp and paper industry
• Aerospace (turbine blades)
• Mechanical parts
• Nuclear waste barrel
standard:
ASTM .............. A693 grade 630 (AMS 5604B) UNS S17400
EURONORM ..1.4542 X5CrNiCuNb 16-4
AFNOR ........... Z5 CNU 17-4PH
DIN .................. 1.4542
Machining:
Thermoforming
Hot forming should be carried out within a temperature range
950-1200ºC (1742-2192ºF). Complete heat treatment including
solution annealing, cooling (less than 25ºC) and aging (at a given
temperature).
Cutting:
Thermal cutting (plasma, saws, etc.): Taking into account the
thermal metamorphism part, this level of cut program should be
appropriate. After cutting, to be milled to remove the oxide layer.
Mechanical cutting: cutting, stamping, cold saws.
Name & Description | Forging Handling Capacities | Quantity |
3150 Tons Free Forging Hydraulic Press | Max. Single Forging in 28 Tons | 1 |
5000mm Diameter Rolling Forging Machine | Max. Single Forging in 16 Tons | 1 |
8 Tons Free Forging Hummer | Max. Single Forging in 7.5 Tons | 1 |
6 Tons Free Forging Hummer | Max. Single Forging in 5.5 Tons | 1 |
5 Tons Free Forging Hummer | Max. Single Forging in 4.5 Tons | 1 |
60 Tons Forging Handling Operator | Max. Single Forging in 45 Tons | 1 |
10 Tons Forging Handling Operator | Max. Single Forging in 7.5 Tons | 1 |
80 Tons Crane | Max. Single Ingot in 80 Tons | 1 |
60/30 Tons Crane | Max. Single Ingot in 60 Tons | 1 |
30/10 Tons Crane | 30/10 Tons | 4 |
Trolley Heat Furnace | 5000*1500*1200 mm | 3 |
Trolley Heat Furnace | 8000*2000*1600 mm | 3 |
Trolley Heat Furnace | 6500*1500*1200 mm | 3 |
Vertical Heat Furnace | Ø2500*10000 mm | 2 |
Total Forging Equipment Quantity | 24 | |
