Jiangsu Liangyi Co.,Limited |
|
We are professional Invar 36(FeNi36,Nilo 36,Alloy 36,1.3912,NAS 36,UNS K93600)Controlled Expansion Alloys Seamless Pipes Tubes Welded Piping Tubings factory from china
Alloy 36 (NILO 36, INVAR 36) is a Nickel-Iron, low expansion alloy
which contains 36% Nickel. Invar 36 has a low coefficient of
expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 also retains good strength and toughness at cryogenic
temperatures. Common applications include tooling for aerospace
composites, standards of length, measuring devices, thermostat
rods, laser components and tanks and piping for the storage and
transportation of liquefied gases.
FORGING: The principal precaution to observe in forging is to heat
quickly and avoid soaking in the furnace. Long soaking may result
in a checked surface due to absorption of sulfur from the furnace
atmosphere and/or oxide penetration. A forging temperature of
2000/2150øF (1100/1180øC) is preferred.
Invar alloy 36 may also be swaged and cold upset.
GRINDING: A silicon carbide wheel is desirable, preferably a soft wheel which will wear without loading. For finish grinding, a satisfactory grade to start with is No. 80 grit.
WELDING: Alloy 36 can be welded by the conventional methods.
Caution must be taken so as not to overheat the molten metal. This
will avoid spattering of the molten metal and pits in the welded
area. When filler rod is required, Invar rod has been used.
BRAZING: Silver and zinc-free alloys have been used for brazing
Invar 36. This alloy should be annealed prior to brazing. Joints
should be designed to avoid placing material in tension during
brazing.
PLATING: Alloy 36 can be chromium, cadmium and nickel plated or zinc coated by the usual methods used for ferrous alloys.
Round pipe: | -O.D. : 6mm~630mm Wall Thickness: 0.4mm~30mm |
Square pipe: | -Dimension : 10*10mm to 100*100mm Wall Thickness : 0.30mm to 3.0mm |
Length: | -less than 6 meter(load in 20ft container), 6 meter( load in 40ft container) -Different length is available upon customer 's request. |
Tolerance: | As client's requirements. |
Surface finish: | -Satin Finish(180#.240#.320#).,Bright finish (400#,600#,mirror),Mill finish(2B),Hairline -Finish(HL/Brushed), Ti-gold,glossy matt, dull and so on. |
Packing: | -Each tube in a plastic bag with size label outside and pack in small -bundles or according to different request. |
MOQ: | -Each size one ton, LCL cargo is available. |
Delivery time: | -7-10 days for one FCL or according to order list detail. |
Payment: | -T/T or L/C. |
Note: | We can accept the third inspection. |