Limit height, width, mass, axle weight signs

Product introduction: It means that vehicles with axle weight exceeding the value shown on the sign are forbidden to pass. Set at both ends of the bridge where the axle weight of the vehicle needs to be restricted. The number in Prohibition 37 is an example, which means that vehicles with an axle weight exceeding 10 t are prohibited from passing. For the section where this sign is set, a corresponding guidance sign should be set up at the appropriate position of the intersection before entering this section, so that vehicles with axle weight exceeding the value indicated on the sign can detour ahead of time.

Product introduction: It means that vehicles with a total mass exceeding the value shown on the sign are forbidden. It is located at both ends of the bridge that needs to limit the quality of the vehicle. The number in Prohibition 36 is an example, which means that vehicles with a total mass exceeding 10 t are prohibited from passing. For the section where this sign is set, appropriate guidance signs should be set at the appropriate location of the intersection before entering this section, so that vehicles with a total mass exceeding the value indicated on the sign can drive around the road ahead of time.

Product introduction:When the location is to be set with corresponding guidance signs, vehicles with a total mass exceeding the value indicated on the signs can drive around the road ahead of time. As an example, it means that vehicles with a loading height of more than 3.5m are prohibited from entering. The road clear height does not need to be set on the roads that comply with the relevant laws, regulations and standards. For the section where the sign is set, a corresponding guide sign should be set at the appropriate position of the intersection before entering this section, so that the loading height exceeds the sign. Value vehicles can detour ahead of time.

Product introduction: It is forbidden to allow vehicles with a loading width exceeding the value shown on the sign. Set the place where the maximum allowable width is restricted. The number in Prohibition 34 is an example, which means that vehicles with a loading width exceeding 3m are prohibited from entering. Road clear width does not need to be set on roads that comply with relevant laws, regulations and standards. Roads with this mark should be provided with appropriate guidance signs at appropriate positions at the intersection before entering this section, so that the loading width exceeds the sign. The indicated vehicle can be detoured ahead of time.

【product description】

The road traffic safety signs produced by our company are made according to the national "Road Traffic Safety Signs". The thickness is 1.2mm, 1.5mm, 2.0mm, 3.0mm, etc. The imported high-quality aluminum plate is used as the material, which is printed by the United States, Japan, and domestic reflective film through silk screen process. Round specifications: 60cm, 80cm, 100cm. Triangle specifications: 70cm, 90cm, 110cm. The quadrangular specifications, patterns, and specifications are designed and produced according to national industry standards. Customers can also provide patterns and specifications by themselves, and our factory produces according to requirements. Welcome new and old customers to call to order, thank you for your cooperation!