Active Member
|
[China]
Address: Building 31, Taojiang Economic Development Zone, Taojiang County, Yiyang City, Hunan Province, China
Contact name:Una Zhao
Hunan Kangweining Medical Devices Co.,Ltd |
|
|
Transparent Anti Spitting Comfortable Disposable Protective Face Shield
Product Description
Product Specification
Product Model | GBM 007(Whole sponge) |
GBM 008(Segmented sponge) | |
Product Size | 330*220cm |
Main Ingredients | High permeability PET environmental protection material,
environmental protection breathable sponge. |
Executive Standard | GB-T11651-2008+ GB/T 12903-2008(CHN) |
Product Description | It is usually composed of a protective cover made of polymer
material, a foam strip, a cotton webbing and a fixing device. |
Application | It is used for protection in medical institutions during inspection
and treatment, blocking body fluids, blood splashes or splashes. |
Usage | 1.Read this instruction carefully before use to confirm that the
packaging is not damaged, and confirm that the packaged product is still within the validity period.2. Choose the appropriate model specifications to wear. |
Precautions | 1. This product is limited to one-time use and destroyed after use. 2. It is forbidden to use if the inner packaging is damaged or expires. 3. The used products shall not be discarded at will to prevent environmental pollution. 4. When putting on and taking off, pay attention to the clean surface to avoid pollution. |
Storage | Keep it in dry,clean and non-corrosive environment.Away from fire
and flammable materials. |
Manufacturer | Global Bio Medical(Shandong) Co., Ltd. |
Production Address | No.1 Walking Street, Xiaozhi Town, Pingyin City, Jinan City,
Shandong Province. |
Product Performance
1. Appearance: The surface of the isolation mask should be clean
and free of stains and dirt; it should be complete without damage
or separation; the protective cover should be smooth, free of burrs
and scratches; the color of the protective cover should be
transparent, and the sight should be clearly visible when worn.
2. Structure: After wearing the isolation mask, it should be able
to completely cover the face of the wearer. It should be kept
upright in the longitudinal direction, and must not sag. There
should be no creases when it is bent in the horizontal direction.
3. Elongation rate of elastic band: The elastic band should be
free, and the elongation rate of the elastic band should not be
less than 50%.
4. The breaking strength of the connection between the fixing
device and the protective cover should not be less than 10N.
5. The separation joint of isolation mask should be firm. The
horizontal plane is subjected to 7N gravity pull, and the vertical
direction is subjected to 3N gravity pull, which lasts 15s, and
should not fall off.
