Active Member
|
[China]
Address: Economic Development Zone, Ruian 325200, Zhejiang Province, China
Contact name:
Zhejiang Jiangnan Pharmaceutical Machinery Co., Ltd. |
|
|
Tablet Coating Machine High Efficiency BG-(5-1000) SERIES for Pharmaceutical and Food
MAIN TECHNICAL PARAMETERS:
Model Item | BC600E | BG400E | BG150E | BG80E | BG40E | BG10E | |
| Load Capacity | 600L | 400L | 150L | 80L | 40L | 10L | |
| Rotation Speed of Coating Pan(RM) | 1-12RPM | 1-13RPM | 1-16RPM | 1-19RPM | 1-21RPM | 1-25RPM | |
| Power of Main Machine | 5. 5kw | 3kw | 2.2kw | 1. 5kw | 1.1kw | 0.55kw | |
| Diameter of Coating Pan | φ1580mm | φ1580mm | φ1200mm | φ930mm | φ750mm | φ500mm | |
| Motor of Air Exhaust Cabinet | 11KW | 7. 5KW | 5.5KW | 3KW | 2.2KW | 0.75KW | |
| Air Exhaust Flow | 15450m³/h | 10000m³/h | 7419m³/h | 5268 m³/h | 3517 m³/h | 1285 m³/h | |
| Motor Power of Hot Air Cabinet | 5.5K | 3KW | 1. 5KW | 1.1KW | 0.75KW | 0.37KW | |
| Hot Air Flow | 7419 m³/h | 5200 m³/h | 2356 m³/h | 1685 m³/h | 1285m³/h | 816 m³/h | |
| Weight of Main Machine | 2800KG | 1562KG | 1020KG | 684KG | 500KG | 200KG | |
| Clean air | Pressure | ≥0.4Mpa | ≥0.4Mpa | ≥0.4Mpa | ≥0.4Mpa | ≥0.4Mpa | ≥0.4Mpa |
| Air Consumption | 2 m³/min | 1.5 m³/min | 1 m³/min | 0.4 m³/min | 0.4 m³/min | 0.3 m³/min | |
| Machine Dimension (L*W*H) | Main machine | 2000*2277 *2600mm | 2000*1670
*2660mm | 1570*1260 *2250mm | 1210×1000 *1900mm | 1000*800
*1900mm | 900*620
*1800mm |
| Hot Air Cabinet | 1600*1100
*2350mm | 1000*900
*2300mm | 900*800
*2050mm | 900*800
*2050mm | 900*800
*2050mm | 800*650
*1600mm | |
| Air Exhaust Cabinet | 1050*1000
*2470mm | 1050×1050 ×2300mm | 950*950
*2245mm | 900*820
*2130mm | 820*720
*1750mm | ||
Performance and Characteristics:
The coating boiler equipped in the high pressure spray gun, there
set a cleaning sprayer at the air exhaust exit and hot air mouth,
which can be rotated in automatic and full direction ,without dead
corner more convenient to clean. (Option)
Select the imported spray gun. It's convenient to operate and easy to master and flexible controlled technological requirement. The spray gun head requirement must keep in the range of 0.29 Mpa to 0.39 Mpa. Angle and sector can be adjustable , uniform density and particle in spray pressure and 0.4-0.5Mpa in atomization pressure that avoid the dropping leakage and blockage phenomenon of size, uniform atomization and large spray area, practical to adjust flow, free leakage and blockage, angle and sector.
Film coating machine contains the mechanical device of cauldron wrapping little material can coat at least 20~40kg plain pills in 150 type coating machine, regulate through it inherent machinery, make a small mount of medium coat in cauldron and will not cause the wasted of dressing and greatly improve the scope of appliance.
Filtration Hot Air Cabinet
Firstly, air inhaled in through the centrifugal fan should be purified up to the 100,000 Level after three times filtration, involving primary filtration, medium filtration and high filtration, then be blown to the drum of main machine through the (steam or electrothermal) .Equipped with a vibration damper. Equipped with primary filtration device in the air inlet.
Air Exhaust Cabinet
Used for exhausting air out of drum in the major machine ( including dust absorption), keeping the working area under negative pressure. Equipped with a vibration damper. The exhaust outlet is equipped with a reflux-proof device. Close the exhaust cutlet before stop the machine to prevent the air in the exhaust cabinet from reflux. It is equipped with dust abatemert & filtration by vibration. so the vibration and dust are insulated, the dust is stopped from fly off and the dust abatement is automatically separated, which makes easy.
Agitating and Holding Tank (Electric-Heating)
Thermal stirring drum adopts electric heating type. It is equipped with pneumatic stirrer which is driven by compressed air, stable rotating speed and stepless speed regulating, medium can be stirred homogeneous. It can be controlled automatically at normal temperature to 80°C, easy-operating, safe and reliable. All parts are made of stainless steel, inside and outside is mirror polished.
Other
This machine can be widely used for coating chewing gum, nuts,
jelly candy, bubble gum, candy etc. And it has such characteristics
as good appearance in design, high efficiency, low energy
consumption etc.
Sales Regions and Fields
1.Europe,Australia,America,Asia and etc.
2.Pharmaceutical,food and biological fields, and etc.
Business Terms
1.Delivery time : 45days
2.Port:Shanghai or Ningbo
3.Terms of Payment: TT or L/C
