F40 Rear Brake Caliper 380x28mm Drilled Disc System For XT6

Jekit F40 Red Caliper 380x28mm Drilled Disc System For Cadillac XT6

Modification list
Modification project: Cadillac XT6 brake upgrade
Hub size: 20 inches
Modified product:
Rear wheel casting four piston caliper 380x28mm high carbon heat treatment perforated disc + hand brake caliper,
Dual bracket
brake steel hose

First, will front wheel shake if only change front kit?
No, the multi piston caliper is characterized by linearity and linearity. It is not only six pistons, but even four pistons. Compared with the original single piston, it is also directly linear. Linearity means that there is a response when you step on it. There is no brake feedback when you step on a certain position, so it will not be as abrupt as the original single piston. After you step on the brake pedal, the vehicle feels firmly absorbed by the ground. The premise is a good tire. Remember, there is no abruptness, only linearity.

The budget is enough, the rear wheels are qualified, the front and rear are changed, the budget is not enough, it's OK to change only the front wheels.

Second, can I just change the front wheel?
Yes, in most cars, whether rear drive or front drive, the braking force of the front wheel is set at more than 70% when leaving the factory. There is no problem changing only the front wheel.

Third, which models can be changed to rear wheel calipers?
Most models with hand brake or foot brake can be changed directly, such as the three-series before G20. The hand brake of the rear wheel is integrated into the head drum, which is very convenient to change

Our caliper set is a popular modified brake set. It has been highly sought after by motorists because of its high cost performance and beautiful appearance. The rear wheel dual calipers are safer and more stable. In addition to the great change in appearance compared with the original factory, the important thing is that the braking performance has been greatly improved compared with the original factory. For motorists who pursue performance and cost performance, this is a recommended brake package. For more models, the rear wheel double calipers program is welcome to consult our business or public official account message.

WHEN TO REPLACE BRAKE PADS

Pads should be replaced if they are worn out, contaminated, or to change pad material for performance reasons.

WEAR

Generally, the pad material should measure at least 1mm thick. By stacking 3 business cards you can create a makeshift feeler gauge that is approximately 1mm

Check with the pad manufacturer for exact wear specifications, and use a caliper for accurate measurements.

PAD MATERIAL

Pads come in different materials — metallic, organic, and semi-metallic — each with their own advantages and disadvantages