Active Member
|
[China]
Address: NO.1980 Waiqian Road, Jiading, Shanghai, China
Contact name:Luke Lee
Shanghai ZhongRui environmental protection equipment Co., Ltd. |
|
|
Technical Parameters
Model: ZR3000P8L
Belt width: 3000mm
Mud processingcapacity: 40-50t/h
Filter cakeproduction: 12-15t/h
Sediment percentage: 75-85%
Total power: 33kw
Model technical parameters
| Model | Belt width (mm) | Mud Processing capacity (Ton/H) | Filter cake production (Ton/H) | Sediment percentage (%) | Total Power of equipment (KW) | Total power (KW) | Dimensions L*W*H(MM) | Weight (KG) |
| Zr-1000P8L | 1000 | 10-16 | 2-3 | 75-85 | 3 | 10 | 5500*2000*2100 | 4500 |
| Zr-1500P8L | 1500 | 15-25 | 4-5 | 75-85 | 4 | 13 | 5800*2400*2200 | 6500 |
| Zr-2000P8L | 2000 | 25-35 | 6-7 | 75-85 | 5.5 | 17 | 7500*2900*2300 | 7600 |
| Zr-2500P8L | 2500 | 30-40 | 10 | 75-85 | 5.5 | 17 | 7800*3200*2500 | 9200 |
| Zr-3000P8L | 3000 | 40-50 | 12-15 | 75-85 | 11 | 33 | 12500*3500*2500 | 14500 |
| Zr-3500P8L | 3500 | 50-60 | 15-17 | 75-85 | 11 | 33 | 13000*14000*2500 | 15500 |
Details
1. Pneumatic device
The pneumatic device controls the tension and deviation of the
filter belt and the pressure adjustment and operation of the
clamping roller. The pneumatic control component is sensitive,
reliable, and durable.
2. Filter net
The pressure filter net is woven from the polyester wire. It is
divided into interfaces with port and nonport interfaces. Choose a
different filter net according to the characteristics of the
sludge. High-quality filter nets are adopted with the features of
high strength, good permeability, difficulty to block, smooth surface, high solid
recovery rate, easy to clean, and easy to disassemble and assemble.
3. Cleaning device
The cleaning device consists of a water jet connecting pipe and
nozzle, spray brush, valve, waterproof cover, and filter. Apply
stainless steel 304 to produce the nozzle and each nozzle can be
cleaned and replaced separately. The residual sludge attached to
the filter belt can be removed effectively and continually through
the belts rotary and fan-shaped water spray.
4.Discharging device
The function of the filter scraper is to scrape out the filter
cake, the scraper pressure can be adjusted, and the wear of the
filter net is small.
Belt Press Filter Working Principle
The raw material, passing through the distributor, is pre-pressed and dehydrated in the wedge area, and then further squeezed and dehydrated in the large area low pressure drainage area composed of porous drainage rollers. Then, the raw material with a certain degree of dryness is pressed by three sets of high-intensity squeezing, i.e. roller I, roller II and roller III. Then the raw material with extremely low water content is pressed and dehydrated again by the mesh belt at the discharge port. Finally the dry filter cake is discharged. It basically meets the requirements of major varieties for moisture content, and the entire process is subject to extrusion and shear forces.
Application
