Active Member
|
[China]
Address: 803, WeiXinDa, BaoMin 2nd Road, XiXiang, Bao'an District, Shenzhen, Guangdong Province, China.
Contact name:Orchard
Shenzhen Jelinn Technology Co., Ltd. |
|
|
Deutsch 6 Pin J1708 Female to Right Angle OBD2 OBDII Female and
6-Pin Male Splitter Y Cable
Specification
| 6-Pin J1708 female connector | equivalent of Deutsch HD16-6-12S-B010 |
| 6-Pin J1708 male connector | equivalent of Deutsch HD10-6-12P |
| Color of 6-Pin J1708 female connector | Grey |
| OBD2 female plug | with KET terminals |
| Wire | 20AWG, pure copper |
| Material of 6-Pin J1708 connectors | PA66 + glass fiber |
| Material of OBD2 female plug | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The 6-Pin J1708 female connector is with a locking ring. Rotating the locking ring to the right place after plugging to a 6-Pin J1708 male receptacle assures that the connector won’t come unplugged accidentally.
The end of 6-Pin J1708 female and male plugs can
be overmolded or not, according to your needs. If the ends are overmolded, the cables are more sturdy and durable.
If not overmolded, the price can be lower because the raw material
and labour cost is saved.
Overmolded
Not overmolded
The OBD2 female connector is with KET terminals which make the
OBD2 female connector more endurable.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like
this:
| OBD2 female | Signal | 6-Pin J1708 female | 6-Pin J1708 male |
| 4 or 5 | Ground | E | E |
| 16 | Battery | C | C |
| 12 | J1708, CAN-H | A | A |
| 13 | J1708, CAN-L | B | B |
| / | D | D | |
| / | F | F |
All 6 pins of the J1708 male connector to female connector are wired. The pin assignment or pin out can also be customized according to your needs.
Application
The common application is to connect telematics, fleet management or trucking devices such as GPS Trackers to older 6 pin J1708 round diagnostic port in medium and heavy duty vehicles model years from the early-to-mid-2000s.
This Y Cable allows port relocation or connection of multiple
devices. This Y cable is for older medium and heavy duty vehicles
that have the J1708 6 pin diagnostic ports adjacent to the clutch
pedal or in some other inconvenient location. It is also for
vehicles that require multiple devices be connected to the J1708 6
pin diagnostic port. This cable allows the J1708 diagnostic port to
be split, with one port going to the original location and the
other OBD2 female plug going to a GPS tracker or another
device which has a OBD2 male port.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel
free to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
