Active Member
|
[China]
Address: 803, WeiXinDa, BaoMin 2nd Road, XiXiang, Bao'an District, Shenzhen, Guangdong Province, China.
Contact name:Orchard
Shenzhen Jelinn Technology Co., Ltd. |
|
|
Right Angle Green Deutsch 9-Pin J1939 Female to Right Angle OBD2
Female and J1939 Male Split Y Cable
Specification
| J1939 female socket | equivalent of Deutsch HD16-9-1939S-P080 |
| Type of J1939 female socket | Type 2 |
| J1939 male receptacle | equivalent of Deutsch HD10-9-1939P-P080 |
| Type of J1939 male receptacle | Type 2 |
| OBD2 female connector | with KET terminals |
| Wire | 20AWG, pure copper |
| Material of J1939 connectors | PA66 + glass fiber |
| Material of OBDII connector | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The J1939 Deutsch 9-Pin female socket is green. The overmolded PVC injection at the end of J1939 Deutsch 9-Pin female socket is right angle 90 degree.
The Deutsch 9 Pin female socket is Type 2, so its Pin F is with smalller
diameter as Pin C and Pin J. Type 2 J1939 female sockets can be
inserted into Type 1 or Type 2 J1939 male receptacles.
The OBD2 female connector is with KET terminals which make
it more endurable.
The overmolded PVC injection at the end of OBD2 female connector is right angle 90 degree.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this
(4 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
| 2 | J1708-H | F | F |
| 10 | J1708-L | G | G |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
| 12 | J1708-H | F | F |
| 13 | J1708-L | G | G |
The 6-wire cable also includes wiring for the J1708 lines. If you do not need the J1708 wires, it is better not to connect them as sometimes the added lines can interfere with the operation of some GPS trackers.
The pin assignment or pin out can also be customized according
to your needs.
Application
This cable is used to connect telematics, fleet management devices or trucking technology
devices such as GPS Trackers or ELDs to commercial vehicles that
have the J1939 9-pin round Deutsch ports.
This cable will also allow OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software) to connect to the round J1939
connector. Bear in mind that most OBD2 software and scanners are
based on reading PIDs, which are single parameters. J1939 is a PGN
based protocol, where each PGN contains multiple parameters. Your
scan tool must be able to handle PGNs if it is to work with this
cable.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel
free to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
