Shenzhen Jelinn Technology Co., Ltd. |
|
Green Deutsch 9 Pin J1939 Female to OBD2 OBDII 16 Pin Female
and J1939 Male Splitter Y Cable
Specification
J1939 female socket | equivalent of Deutsch HD16-9-1939S-P080 |
Type of J1939 female socket | Type 2 |
J1939 male receptacle | equivalent of Deutsch HD10-9-1939P |
Type of J1939 male receptacle | Type 1 |
OBD2 female connector | with KET terminals |
Wire | 18AWG, pure copper |
Material of J1939 connector | PA66 + glass fiber |
Material of OBD2 connector | PA66 |
Pin assignment or pin out | customized |
Cable length | customized |
Pins or terminals | copper, nickel-plated or gold-plated |
Contact Resistance | 3 ohm max. |
Insulation Resistance | 5M ohm min. |
Working Temperature | −25℃ ~ +85℃ |
Testing | 100% open, short and miss-wire testing |
Testing Voltage | DC300V 5M ohm/10ms |
Warranty | 1 year |
We opened plastic molds of the connectors, sockets, plugs and receptacles. 18AWG pure copper quality wires are employed to manufacture these cables. We can always make the cables with excellent connectivity and durability.
The J1939 female socket is with a locking ring. Rotating the locking ring after plugging assures that the connector won’t come unplugged accidentally.
The end of Deutsch 9-Pin female and male plugs can be overmolded or not, according to your needs. If the ends are overmolded, the cables are more sturdy and durable. If not overmolded, the price can be lower because the raw material and labour cost is saved.
Overmolded
Not overmolded
The Deutsch 9 Pin female socket is Type 2, so its Pin F is with smalller
diameter as Pin C and Pin J. Type 2 J1939 female sockets can be
inserted into Type 1 or Type 2 J1939 male receptacles.
The Deutsch 9 Pin male receptacle is Type 1, so its Pin F is with
bigger diameter. Type 1 or Type 2 J1939 female sockets can be
inserted into Type 1 J1939 male receptacles.
The OBD2 female connector is with KET terminals which make the
OBD2 female connector more endurable.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this
(4 pins to be connected):
OBD2 female | Signal | J1939 female | J1939 male |
4 or 5 | Ground | A | A |
16 | Battery | B | B |
6 | J1939, CAN-H | C | C |
14 | J1939, CAN-L | D | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
OBD2 female | Signal | J1939 female | J1939 male |
4 or 5 | Ground | A | A |
16 | Battery | B | B |
6 | J1939, CAN-H | C | C |
14 | J1939, CAN-L | D | D |
2 | J1708-H | F | F |
10 | J1708-L | G | G |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
OBD2 female | Signal | J1939 female | J1939 male |
4 or 5 | Ground | A | A |
16 | Battery | B | B |
6 | J1939, CAN-H | C | C |
14 | J1939, CAN-L | D | D |
12 | J1708-H | F | F |
13 | J1708-L | G | G |
The 6-wire cable also includes wiring for the J1708 lines. If you
do not need the J1708 wires, it is better not to connect them as
sometimes the added lines can interfere with the operation of some
GPS trackers.
The pin assignment or pin out can also be customized according to your needs. If there is no need for more pins to be connected, we suggest we just connect the necessary pins you need. If more pins are connected, the price of the cable will be higher because the raw material and labour cost will be higher.
Application
This cable is used to connect telematics, fleet management devices or trucking technology devices such as GPS Trackers or ELDs (Electronic Logging Devices) to commercial vehicles that have the J1939 9-pin round Deutsch ports.
This cable will also allow OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software) to connect to the round J1939
connector. Bear in mind that most OBD2 software and scanners are
based on reading PIDs, which are single parameters. J1939 is a PGN
based protocol, where each PGN contains multiple parameters. Your
diagnostic or scanner tool must be able to handle PGNs if
it is to work with this cable.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel
free to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)