Results foritalian plug socketfrom 284 Products.
|
Device for testing non-solid pins NP-1 Product overview: The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made ...
|
|
|
|
1. Forged socket welding/weld SW NPT threaded/screwed pipe fittings 90deg / 45deg elbow tee cross cap full / half coupling swage nipple union (hex square round head) plug bushing ...
|
|
|
|
Load of power line tester LP-1, LP-2 Product information: This device is designed according to the relevant technical requirements of IEC, UL, and related technical requirement of ...
|
|
|
1. Forged socket welding/weld SW NPT threaded/screwed pipe fittings 90deg / 45deg elbow tee cross cap full / half coupling swage nipple union (hex square round head) plug bushing reducing/reducer inserts boss 2. duplex ...
|
|
|
|
Clamping Device Test Machine CL-1 Technical parameters: Power Supply: 220V 50Hz or 115V 60Hz The range of counting number: 1~9999(150 times(15 min) is by default. Rate of Testing: ...
|
|
|
1. Forged socket welding/weld SW NPT threaded/screwed pipe fittings 90deg / 45deg elbow tee cross cap full / half coupling swage nipple union (hex square round head) plug bushing reducing/reducer inserts boss 2. duplex ...
|
|
|
|
Device for testing non-solid pins NP-1 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, ...
|
|
|
1. Forged socket welding/weld SW NPT threaded/screwed pipe fittings 90deg / 45deg elbow tee cross cap full / half coupling swage nipple union (hex square round head) plug bushing reducing/reducer inserts boss 2. duplex ...
|
|
|
|
Device for testing non-solid pins NP-1 Technical parameters: 1, Steel rod:Φ4.8mm; 2, Load weight:100N; 3, The stress pushed on bolt is from the rotating handwheel operated by ...
|
|
|
|
Device for testing non-solid pins NP-1 Responsibility is the assurance of quality, and quality is the life of corporation. We are looking forward to long term cooperation with ...
|
|
|
|
Apparatus for testing cord retention CR-1 Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the ...
|
|
|
|
Clamping Device Test Machine CL-1 Application: Terminals with screw clamping shall be so designed and constructed that they clamp the conductor(s) without undue damage to the ...
|
|
|
|
Pendulum Hammer Test Apparatus PH-2 Product details: This testing device conforms to IEC62262. It is used for the mechanical strength test of the sheet metal like the substation ...
|
|
|
|
Climatic Chamber LH-1 Product details: This chamber is in accordance with the IEC60884.1 standard which is used for the heat ageing test and electrical insulation test of the ...
|
|
|
|
Screwed Glands Tester SG-1 Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a ...
|
|
|
|
Apparatus for verification of maximum and minimum force MF-1 Our company has a core team with years of technology development, technology transfer, technical consulting, technical ...
|
|
|
|
Temperature Rise Tester TR-1 Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 ...
|
|
|
|
Flexible Cable Torque Tester FCT-1 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, ...
|
|
|
|
Pendulum Hammer Test Apparatus PH-1 Product details: This testing device conforms to many standard requirements like IEC60068-2-75 IEC0884-1fig22-26. It is used for the mechanical ...
|
|
|
|
Low-temperature impact test device LTI-1 Product information: The HT Apparatus for impact test at low temperature confirms to the standard of IEC60884 figure 27 and figure 42. The ...
|
|
|