|
[China]
Trade Verify
Address: Room1905, No.251, Huipu Financial Building, Tongyang South Road, Liangxi District, Wuxi City, Jiangsu Province, China
Contact name:Huang
Wuxi Yushun Metallurgical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Medium Frequency 60--120mm Steel Billet Induction Heating Furnace Manufacturers For Steel Deformed Bar Production
Product Features
● Fast heating speed, high production efficiency, less oxidative
decarburization, saving material and forging die cost. Since the
principle of medium frequency induction heating is electromagnetic
induction, its heat is generated in the workpiece itself. The
average worker can use the medium frequency electric furnace to
carry out the continuous work of the forging task ten minutes after
going to work. The professional workers do not need to burn the
furnace and seal the furnace in advance.
● Excellent working environment, improve workers' working
environment and company image, no pollution, low energy
consumption.
Induction heating is the most energy-efficient heating method in
electric heating furnaces. The power consumption per ton of
forgings heated from room temperature to 1200 °C is less than 360
degrees.
● The heating is even, the temperature difference between the core
and the core is very small, and the temperature control precision
is high.
Induction heating heat is generated in the workpiece itself, so the
heating is uniform, and the temperature difference between the core
and the core is extremely small. The application of temperature
control system can achieve precise temperature control to improve
product quality and pass rate.
Manufacturing process of walking beam furnace
The front part of the feeding roller table → weighing → measuring length → positioning of the feeding roller table → opening of the feeding furnace door → hydraulic steel pusher → measuring the billet width → positioning on the billet walking beam → the mechanical equipment (including hydraulic system) of the heating furnace move according to the process design. The billet is heated in the furnace according to the heating process requirements → the billet is positioned through the laser detection point → the steel signal is required → the discharge furnace door rises → the steel is taken by the steel holder → the billet is positioned on the discharge roller → the furnace door is closed → descaling and rolling.
Technical performance of 250t/h walking beam furnace
| No. | Name | Unit | Value |
| 1 | Usage | Heating before billet rolling | |
| 2 | Heating capacity | t/h | Cold charging:250 |
| 3 | Heating billet specification | mm | 130-180×600-1000×10000 |
| 4 | Heating temperature | ℃ | 1150 -1250 |
| 5 | Fuel type lower calorific value | Blast furnace gasKJ/m3 | QBlast furnace=800×4.186 |
| 6 | Rated unit consumption | GJ/t | Cold charging:1.34－1.38 |
| 7 | Exhaust temperature | ℃ | ≤150 |
| 8 | Walking mechanism drive mode | Hydraulic | |
| 9 | Walking mechanism parameter | mm | Step pitch: 550(max), lifting100+100 |
| 10 | Walking period | s | 50 |
| 11 | Water beam cooling type | Evaporative cooling |
| Condition: | New |
| Type: | Heating furnace |
| Warranty of core components: | 1 Year |
| Core components: | Bearing, Gearbox, Motor, Gear |
| Voltage: | According to the actual condition |
| Power: | Negotiated |
| Dimension(L*W*H) | Customized |
| specification: | 50t/h-200t/h |
| Output: | Negotiated |
| After-sales-Service Provided: | Field installation, commissioning and training, Field maintenance and repair service |
| Applicable industries: | Manufacturing plant, construction works |
| Application: | Steel Industry |
| Color: | Customized |
| Billet size: | Customized |
Packaging Details: Wooden case packing or nude packing
Port: Tianjin
Lead Time:
| Quantity(Sets) | 1-1 | >1 |
| Est.Time(Days) | 30 | To be negotiated |
specification
