Home Products

iso 9223 wind measurement lidar

Refine Search
Results foriso 9223 wind measurement lidarfrom 5058 Products.
tilt angle sensor high resolution for wind power turnbins incline and vibration measure for safety purpose ▶ INSTALLATION PRECAUTION Please install the tilt sensor according to the ...
china
Verified
Molas NL 10 simultaneous measurements ranges wind lidar | Product introduction Molas NL nacelle wind lidar system provides measurement and recording of wind field information data ...
china
Verified
ISO STANDARD ULTRA THIN ENAMELED COPPER WINDING WIRE COPPER MAGNET WIRE 1MM POLYESTER INSULATION A special type of enamelled wire is self bonding wire. Self bonding wire is an ...
Verified
Introduction: This fully automatic Oxygen Index Measuring Instrumentmeasures minimum oxygen concentration as necessary when specimen combustion. The oxygen sensor is adapted ...
Hunan, china
Verified
Wind power inclination safety sensor vibration safety sensor ​ ▶ INSTALLATION PRECAUTION Please install the tilt sensor according to the correct method. Incorrect installation will ...
china
Verified
Operating temperature range -40℃ ~ 50℃ Molas B300(offshore) Lidar | Product introduction The working principle of wind measurement lidar is shown in the figure below. The signal ...
china
Verified
Triple Insulated Stramded Wire TIW -B ISO/UL Copper Motor Winding Enameled Solid IEC/JIS/NEMA Triple insulated wire has excellent insulation properties and can safely transmit ...
Verified
replace GAM900 Acceleration precisely measured and safely monitored Nacelle torsion monitoring at wind turbines The AKF392B three axis accelerometer is produced using Swiss ...
china
Verified
Molas 3D doppler wind lidar measurement Operating Humidity 5%~100% RH no condensation lidar rental | Product introduction Molas 3D is a three-dimensional scanning doppler wind ...
china
Verified
Highly Sensitive Vibratory Health Monitor Sensor Voltage Output For Bridge/Road Roller/Wind Turbine Specification AKM390 Parameter Unit Measure range ±2 ±4 ±8 ±10 ±20 ±40 g ...
china
Verified
Lightning strike protection LPZ0B minefield, Class-I Wind Lidar 1,Product introduction meteorological field 1. Provide wind field information to facilitate understanding of the ...
china
Verified
Four beam eolos wind lidar Molas NL Bankable Frequency 4Hz | Product introduction Molas NL conducts wind measurement based on the principle of full coherent Doppler detection. The ...
china
Verified
Wind lidar rental: 4-Beam EOLOS Molas NL, ±0.5° Direction Accuracy | Product introduction Molas NL is based on the principle of fully coherent Doppler detection for wind measuremen...
china
Verified
MOLAS 3D 4/8km typical detection distance Onshore wind measurements | Product introduction Molas 3D 3D scanning wind lidar is a lidar system based on the above principles, with an ...
china
Verified
Applicable water depth: 10m-250m Floating Lidar System Type of wind measurement device: floating lidar wind measurement device is adopted, the buoy adopts the marine buoy with ...
china
Verified
Working Voltage And Frequency 240VAC 50Hz 1,Summary The anti-fall rope is mounted on the OH ring by a bow shackle, and the other end is mounted on the lidar mount or the anchor ...
china
Verified
Molas NL light detection and ranging Measurement Layer 10 lidar rental | Product introduction Molas NL is based on the principle of fully coherent Doppler detection for wind ...
china
Verified
If the following interface appears the software installation is ready 1,Summary At this point, the client starts to receive lidar data, the lidar connection status is “normal”, and ...
china
Verified
For Wind Resource Measurement Lidar Molas B300 Lidar Laser Transceiver | Product introduction The signal light generated by the fiber laser is transmitted to the air to be measured ...
china
Verified
Data Storage ≥3 Months Data (At 4Hz Sampling Rate) 1,Summary In the “Download Settings” section, click “Change Path” to set the download path,click “Download”, and wait for the ...
china
Verified
Page 10 of 50 |< << 6 7 8 9 10 11 12 13 14 >> >|