Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
High quality products
The final bottles are of top-grade and exquisite, with uniform wall thickness, clear surface and almost invisible parting line.
Ensured flatness of both mouth and high precision of the internal and external diameter and the thread of bottle neck, without any scrap or scratches.
Fixed orientation: ISBM machine could make bottles with the same orientation of screw, which could make the closures (screw cap, flip caps, pump, etc.) pointing in the same direction.
Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle.
Upgraded Technology
No reheat needed, it can perform the higher speed and more efficient and energy saving.
Adopted PID control achieves precise and steady temperature for the material barrel and hot runner.
Less transmission and working procedure save the products from damp and pollution so the hygienic requirement especially for food grade containers is well guaranteed.
Hot runner with valve gate type, designed with special anti-leak device, is adopted for higher preform gate finishing
Can use recycling material and combined with the optimized and improved procedures, it achieves the best efficiency and cost.
Modular design so only need to change the mold to make a new machine and produce new style bottles
| Item | Unit | Machine Type | ||
| ISB 1100AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 24:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 150 | |
| Clamp Tonnage | KN | 600 | ||
| Wheel Diameter | mm | 1100 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.5*1.95*3.4 | ||
| Machine Weight | T | 9 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
JASU PET Bottle Making Machine is widely used for various plastic materials and has broad application prospects.
PET stretch blow molding machines is used for producing various
range of bottles that have numerous applications in different
industries such as food & beverages, pharmaceuticals, personal
care & cosmetics and many more.
Cosmetics Packaging: mascara, lotion, cream etc.
Pharmaceuticals: eye drops, medicine bottle, pills, oral liquid, intravenous drip bottles etc.
Baby Feeding Bottles, Spice, Liquor, Carbonated Drink, Beverage Bottles etc.
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.
A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
