Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
The core component of the one-step injection (stretch) blowing process is a triangular turntable, which rotates at 120 degrees.
The plastic melt is injected into the parison under low injection pressure, and the neck of the bottle is precisely shaped.
After proper control, the mold is opened and the mandrel and
parison are transferred to the stretch/blowing station.
Compressed air is then blown into the stretched parison to expand
to the bottles mold.
Then these are rotated to the ejection station.
Meanwhile the bottle is cooled the mold is opened and the finished
bottle is emptied from the mold cavity.
This technique is most effective in applications such as wide
mouthed jars.
Containers will have good surface aesthetics.
No visible parting line.
No runner gate materials.
No need to deflashing and trimming.
Fixed orientation: ISBM machine could make bottles with the same orientation of screw, which could make the closures (screw cap, flip caps, pump, etc.) pointing in the same direction.
Adopt biaxial stretch blow moulding, in which the stretching is done in both longitudinal and transverse direction.
Biaxial orientation increases the tensile strength, gas barrier properties, drop impact strength and clarity of plastics.
Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM)
| Item | Unit | Machine Type | ||
| ISB 1100AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 24:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 150 | |
| Clamp Tonnage | KN | 600 | ||
| Wheel Diameter | mm | 1100 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.5*1.95*3.4 | ||
| Machine Weight | T | 9 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
JASU Blow Molding Machine is widely used for various plastic materials and has broad application prospects
Bottles and jars from 2.5L right down to 1ml all fit within its wide capabilities.
Injection blowing molding is suitable for PET, High transparent PP, PCTG, PETG, SAN, PC, PMMA, PS, Tritan (BPA Free)
A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml.
Widely used for manufacturing bottles for pharmaceutical, healthcare, food, beverages, cosmetics, lampshade and other applications.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
