Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle.
Suitable for all containers irrespective of neck design and weight, considering that there is no restriction to only the preforms available on the market.
It is highly suitable for high-mix low-volume production where profit margins are typically the highest in the industry.
The mold design adopts the method of common mold base.
Only by changing a few mold parts, the product's shape, weight, or even the length can be changed.
It lowers the cost for new mold development, saves time for mold alignment, eases the technical demand for mold changeover, and particularly suits the trend towards high- variety and low-quantity packaging.
Great suitability for fine container production.
Since this process does not require secondary heating, with the help from servo-driven injection system, JASU blow moulding machine is able to save up to 40% in energy consumption while improving the overall output by 25%.
Lower investment cost for equivalent output.
Perform higher speed, automatic producing and no flash or trimmings.
Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system.
Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM) / Blow Moulding Machine
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Blow Moulding Machine is widely used for various plastic materials and has broad application prospects
Food and Dairy: Water bottles, beverage bottles, and food
packaging.
Pharmaceuticals: eye drops, medicine bottle, pills, oral liquid,
intravenous drip bottles etc. Baby Feeding Bottles, Spice, Liquor, Households: households and detergent bottles, laundry bottles,
liquid soap plastic bottles containers and lotion bottles.
Carbonated Drink, Beverage Bottles etc.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
